h1. Mikrotik



RouterOS



http://wiki.mikrotik.com/wiki/MikroTik_RouterOS

http://wiki.mikrotik.com/wiki/Manual:TOC

http://wiki.mikrotik.com/wiki/Manual:Webfig



http://www.mikrotik.com/download.html

http://wiki.mikrotik.com/wiki/Upgrading_RouterOS



h2. RB750UP



http://routerboard.com/RB750UP



Nice box : http://forum.mikrotik.com/viewtopic.php?p=297825#p297825



* http://wiki.mikrotik.com/wiki/Manual:Upgrading_RouterOS

* To update firmware (latest RouterOS 5.12):

* Files / upload choose file : routeros-mipsbe-5.12.npk (12MB)

* Attendre la fin de upload

* System / Packages / IPv6 schedule for update

* System / Reboot

* about 90 seconds. Note: PoE will be cut during the reboot



chiwa admin VLAN 3175

192.168.3.20



telnet login admin pass (vide)

web



<pre>

[admin@rb750up-chiwawa] > interface ethernet print

Flags: X - disabled, R - running, S - slave

# NAME MTU MAC-ADDRESS ARP MASTER-PORT SWITCH

0 ether1-gateway 1500 00:0C:42:E9:BA:8A enabled

1 R ;;; To chiwa's router *** NO POE ***

ether2-master-local 1500 00:0C:42:E9:BA:8B enabled none switch1

2 RS ;;; to Vince' NS5M - To Myrys

ether3-slave-local 1500 00:0C:42:E9:BA:8C enabled ether2-master-local switch1

3 RS ;;; to NS5M east - To CDRX

ether4-slave-local 1500 00:0C:42:E9:BA:8D enabled ether2-master-local switch1

4 RS ;;; to beaconing NS5M (port balcon.3)

ether5-slave-local 1500 00:0C:42:E9:BA:8E enabled ether2-master-local switch1

</pre>



TODO

<chiwawa_42> par contre niveau alim, que du bonheur, ça marche du premier coup
<chiwawa_42> c'est desactivé par defaut, il faut "interface ethernet set ether3-slave-local poe-out=auto"

/interface ethernet set ether2 poe-out=off

/interface ethernet set ether2 poe-out=auto



http://forum.mikrotik.com/viewtopic.php?f=3&t=49976&sid=40ea9661791968a896ab35214dc18f15&start=50

http://forum.mikrotik.com/viewtopic.php?f=3&t=57608



<pre>

[admin@MikroTik-Ouin] > /interface ethernet print detail

Flags: X - disabled, R - running, S - slave

0 R name="ether1-gateway" mtu=1500 l2mtu=1600 mac-address=00:0C:42:D3:94:D5 arp=enabled auto-negotiation=yes full-duplex=yes speed=100Mbps


1 name="ether2-master-local" mtu=1500 l2mtu=1598 mac-address=00:0C:42:D3:94:D6 arp=enabled auto-negotiation=yes full-duplex=yes speed=100Mbps master-port=none bandwidth=unlimited/unlimited switch=switch1 poe-out=auto


2 name="ether3-slave-local" mtu=1500 l2mtu=1598 mac-address=00:0C:42:D3:94:D7 arp=enabled auto-negotiation=yes full-duplex=yes speed=100Mbps master-port=none bandwidth=unlimited/unlimited switch=switch1 poe-out=auto


3 R name="ether4-slave-local" mtu=1500 l2mtu=1598 mac-address=00:0C:42:D3:94:D8 arp=enabled auto-negotiation=yes full-duplex=yes speed=100Mbps master-port=none bandwidth=unlimited/unlimited switch=switch1 poe-out=on


4 R name="ether5-slave-local" mtu=1500 l2mtu=1598 mac-address=00:0C:42:D3:94:D9 arp=enabled auto-negotiation=yes full-duplex=yes speed=100Mbps master-port=none bandwidth=unlimited/unlimited switch=switch1 poe-out=on

</pre>

h2. RB250GS



h2.RB250GS

http://forum.mikrotik.com/viewtopic.php?f=17&t=45721

vlan limitation mikrotik rb250gs