Mikrotik » Historique » Version 2
Laurent GUERBY, 22/01/2012 15:24
| 1 | 1 | Laurent GUERBY | h1. Mikrotik |
|---|---|---|---|
| 2 | 1 | Laurent GUERBY | |
| 3 | 1 | Laurent GUERBY | RouterOS |
| 4 | 1 | Laurent GUERBY | |
| 5 | 1 | Laurent GUERBY | http://wiki.mikrotik.com/wiki/MikroTik_RouterOS |
| 6 | 1 | Laurent GUERBY | http://wiki.mikrotik.com/wiki/Manual:TOC |
| 7 | 1 | Laurent GUERBY | http://wiki.mikrotik.com/wiki/Manual:Webfig |
| 8 | 1 | Laurent GUERBY | |
| 9 | 1 | Laurent GUERBY | h2. RB750UP |
| 10 | 1 | Laurent GUERBY | |
| 11 | 2 | Laurent GUERBY | http://routerboard.com/RB750UP |
| 12 | 2 | Laurent GUERBY | |
| 13 | 1 | Laurent GUERBY | admin VLAN 3175 |
| 14 | 1 | Laurent GUERBY | 192.168.3.20 |
| 15 | 1 | Laurent GUERBY | |
| 16 | 1 | Laurent GUERBY | telnet login admin pass (vide) |
| 17 | 1 | Laurent GUERBY | web |
| 18 | 1 | Laurent GUERBY | |
| 19 | 1 | Laurent GUERBY | TODO |
| 20 | 2 | Laurent GUERBY | |
| 21 | 2 | Laurent GUERBY | <chiwawa_42> par contre niveau alim, que du bonheur, ça marche du premier coup |
| 22 | 2 | Laurent GUERBY | <chiwawa_42> c'est desactivé par defaut, il faut "interface ethernet set ether3-slave-local poe-out=auto" |
| 23 | 2 | Laurent GUERBY | |
| 24 | 2 | Laurent GUERBY | /interface ethernet set ether2 poe-out=off |
| 25 | 2 | Laurent GUERBY | /interface ethernet set ether2 poe-out=auto |
| 26 | 2 | Laurent GUERBY | |
| 27 | 2 | Laurent GUERBY | http://forum.mikrotik.com/viewtopic.php?f=3&t=49976&sid=40ea9661791968a896ab35214dc18f15&start=50 |
| 28 | 2 | Laurent GUERBY | |
| 29 | 1 | Laurent GUERBY | |
| 30 | 1 | Laurent GUERBY | h2.RB250GS |
| 31 | 1 | Laurent GUERBY | |
| 32 | 1 | Laurent GUERBY | |
| 33 | 1 | Laurent GUERBY | http://forum.mikrotik.com/viewtopic.php?f=17&t=45721 |
| 34 | 1 | Laurent GUERBY | vlan limitation mikrotik rb250gs |