Myrys » Historique » Version 115
« Précédent -
Version 115/143
(diff) -
Suivant » -
Version actuelle
Mehdi Abaakouk, 23/04/2015 09:19
Services¶
Liens¶
PC Services de Myrys¶
Infos/Config PC¶
91.224.149.192/24
2a01:6600:8081:c000::/56
fe80::81:c0
Carte mere MSI MS-7756 = H77MA-G43 http://fr.msi.com/product/mb/H77MA-G43.html
Intel(R) Core(TM) i3-3220 CPU @ 3.30GHz 2C/4T http://ark.intel.com/products/65693/Intel-Core-i3-3220-Processor-(3M-Cache-3_30-GHz)
2x2 = 4 GB RAM
HDD 1.5TBx2 en RAID1+LVM
- Bmon pour superviser la bande passante
- bluemind pour une gestion de mail, calendrier/planning, contacts
- owncloud pour faire un serveur de fichiers avec synchro depuis android/linux/windows
Config VLAN¶
Avant
auto lo
iface lo inet loopback
auto eth0
auto eth0.3131
iface eth0.3131 inet static
address 91.224.149.192
netmask 255.255.255.0
gateway 91.224.149.254
vlan_raw_device eth0
auto eth0.20
iface eth0.20 inet static
address 10.20.0.29
netmask 255.255.255.0
vlan_raw_device eth0
apres
auto eth0
auto eth0.3131
iface eth0.3131 inet manual
vlan_raw_device eth0
auto br3131
iface br3131 inet static
bridge_ports eth0.3131
address 91.224.149.192
netmask 255.255.255.0
gateway 91.224.149.254
auto eth0.20
iface eth0.20 inet manual
vlan_raw_device eth0
auto br20
iface br20 inet static
bridge_ports eth0.20
address 10.20.0.29
netmask 255.255.224.0
reload network
$ screen
$ ip link del eth0.3131 ; ip link del eth0.20 ; ip link set eth0 down ; service networking restart ;
Configuration dnsmasq¶
dans /etc/dnsmasq.d/myrys.conf:
interface=br20 enable-ra dhcp-range=10.20.0.40,10.20.15.199,255.255.224.0,3600 dhcp-range=2a01:6600:8081:c0c0::2,2a01:6600:8081:c0c0:FFFF:FFFF:FFFF:FFFF,ra-only,64,3600 dhcp-option=option6:dns-server,[2a01:6600:8081:c0c0::1]
Note: il faut le dnsmasq de wheezy pour que enable-ra soit reconnu
dnsmasq_2.62-3+deb7u1_all.deb 100% 16KB 16.0KB/s 00:00 dnsmasq-base_2.62-3+deb7u1_amd64.deb 100% 362KB 362.2KB/s 00:00 dnsmasq-utils_2.62-3+deb7u1_amd64.deb
Puis forwarding et masquerade dans /etc/rc.local :
echo 1 > /proc/sys/net/ipv4/ip_forward echo 1 > /proc/sys/net/ipv6/conf/all/forwarding echo 1 > /proc/sys/net/ipv6/conf/default/forwarding iptables -t nat -A POSTROUTING -s "10.20.0.0/24" ! -d "10.20.0.0/24" -j MASQUERADE
IPv6 manuel dans /etc/rc.local
ip -6 addr add fe80::81:c0/64 dev br3131 ip -6 addr add 2a01:6600:8081:c000::1/56 dev br3131 ip -6 route add default via fe80::31 dev br3131 ip addr add 10.20.0.1/24 dev br20 ip -6 addr add 2a01:6600:8081:c0c0::2/64 dev br20
Picostation¶
MAC Lieu IP 10.20.0.x IP 169.254 Channel Note
10.20.0.1 PC chaussette
10.20.0.2 TODO switch
00:27:22:04:12:48 salle 3 vidéo 10.20.0.3 18.72 1 Pico2 APSalle3 PoE dans container tetalab
00:27:22:05:12:4B bureau 10.20.0.4 18.75 6 Pico2 APBureau PoE au bureau
00:27:22:05:12:E3 salle 1 théâtre 10.20.0.5 18.227 6 Pico2 APSalle1 PoE marqué salle AG
00:27:22:05:12:7F tetalab 10.20.0.6 18.127 11 Pico2 APTetalab Prise électrique derrière le container avec du jeu / reboot fréquent
10.20.0.7
00:27:22:05:13:29 TODO 10.20.0.8 19.41 11 Pico2 APTODO recup 20140831 / KO disparu 20140416 ? AP6 PoE a coté CISCO / reboot fréquent
10.20.0.9
00:27:22:41:D0:58 regie 10.20.0.10 208.88 1 Pico2 APRegie PoE marqué salle AG
A0:F3:C1:93:B0:61 TLS00 10.20.0.11 6 TPLink 740N TLS00 SSID tetaneutral.net
e8:94:f6:3f:40:2e Edition 10.20.0.12 TPLink 4300 APEdition dual band
10.20.0.13
10:fe:ed:82:99:f3 salle AG 10.20.0.14 11 TPLink 740N APAG salle AG cable marqué baie freebox
10.20.0.15
10.20.0.16
10.20.0.17
10.20.0.18
10.20.0.19
Old:
83:99 bureau sophie WRT54G 10.20.0.9 ??.?? KO offline / WRT54G a ne pas utiliser mauvaise configuration non compatible avec ubnt
00:27:22:05:13:16 local atelier Sophie 10.20.0.7 19.22 1 KO AP5 Switch de distribution pour .3 .6 et .7 disjoncteur a gauche sur le central / reboot fréquent
10.20.0.1 pcmyrys (was: CISCO 3725)
10.20.0.2 unused was: CISCO 2900XL
10.20.0.3-19 Wifi
10.20.0.20 reserved guerby
10.20.0.21 tth Sun Blade IP1
10.20.0.22 tth disponible
10.20.0.23 tth machine de stream audio pour THSF
10.20.0.24 tth raspberry pi IP4
10.20.0.28 pc VM sur chaussette
10.20.0.29 pcmyrys aka "chaussette"
10.20.0.30 nagios ttnn
dhcp-range=10.20.0.40,10.20.20.199
dhcp-range=2a01:6600:8081:c0c0::2,2a01:6600:8081:c0c0:FFFF:FFFF:FFFF:FFFF
AP1
10.20.0.3/24
10.20.0.1
00:27:22:04:12:48AP2
10.20.0.4/24
10.20.0.1
00:27:22:04:12:4BAP3
10.20.0.5/24
10.20.0.1
00:27:22:05:12:E3AP4
10.20.0.6/24
10.20.0.1
00:27:22:04:12:7FAP5
10.20.0.7/24
10.20.0.1
00:27:22:04:13:16AP6
10.20.0.8/24
10.20.0.1
Linksys
? (192.168.123.1) at 00:16:b6:39:83:97 [ether] on wlan0
10.20.0.9 dev eth0.20 lladdr 00:16:b6:39:83:97 REACHABLE
Nmap scan report for 10.20.0.1
Host is up (0.0066s latency).
MAC Address: 00:11:21:8D:DA:F1 (Cisco Systems)
Nmap scan report for 10.20.0.2
Host is up (0.0072s latency).
MAC Address: 00:04:28:D1:0E:00 (Cisco Systems)
Nmap scan report for 10.20.0.3
Host is up (0.0068s latency).
MAC Address: 00:27:22:04:12:48 (Ubiquiti Networks)
Nmap scan report for 10.20.0.4
Host is up (0.0070s latency).
MAC Address: 00:27:22:04:12:4B (Ubiquiti Networks)
Nmap scan report for 10.20.0.5
Host is up (0.0073s latency).
MAC Address: 00:27:22:04:12:E3 (Ubiquiti Networks)
Nmap scan report for 10.20.0.6
Host is up (0.011s latency).
MAC Address: 00:27:22:04:12:7F (Ubiquiti Networks)
Nmap scan report for 10.20.0.7
Host is up (0.011s latency).
MAC Address: 00:27:22:04:13:16 (Ubiquiti Networks)
Nmap scan report for 10.20.0.8
Host 10.20.0.8 is up (0.0011s latency).
MAC Address: 00:27:22:04:13:29 (Ubiquiti Networks)
Nmap scan report for 10.20.0.9
Host 10.20.0.9 is up (0.00076s latency).
MAC Address: 00:16:B6:39:83:97 (Cisco-Linksys)
00:27:22:05:13:29
00:27:22:04:13:29APAG¶
Monitoring installation:
Sur l'AP:
$ opkg update $ opkg install xinetd $ opkg install bash
Sur h2:
scp /etc/xinetd.d/check_mk 10.20.0.14:/etc/xinetd.d/ scp /usr/bin/check_mk_agent 10.20.0.14:/usr/bin/
Sur l'AP:
$ vi /usr/bin/check_mk_agent # Change sheban to #!/bin/sh # line 67, remove the keywork "function" from the run_cached function # remove the virtualbox check. $ /etc/init.d/xinetd enable $ /etc/init.d/xinetd start