Projet

Général

Profil

Onduleur » Historique » Version 3

Laurent GUERBY, 23/04/2012 17:41

1 1 Laurent GUERBY
{{>toc}}
2 1 Laurent GUERBY
3 1 Laurent GUERBY
h1. Onduleur
4 1 Laurent GUERBY
5 1 Laurent GUERBY
h2. PowerWalker VI 650 LCD
6 1 Laurent GUERBY
7 1 Laurent GUERBY
http://www.powerwalker.com/line-interactive.asp?VA_level=650
8 1 Laurent GUERBY
Modèle 650 VA 360W 12V 7Ah 4.3 kg
9 1 Laurent GUERBY
Modèle 850 VA 480W 12V 9Ah 5kg aussi disponible
10 1 Laurent GUERBY
11 1 Laurent GUERBY
- USB data
12 1 Laurent GUERBY
- 2 prises schuko et filtre RJ11
13 1 Laurent GUERBY
14 1 Laurent GUERBY
Entre 50 et 60 euros 
15 1 Laurent GUERBY
* http://www.priceminister.com/offer?action=desc&aid=526668530
16 1 Laurent GUERBY
17 1 Laurent GUERBY
Supporté sous debian squeeze par défaut :
18 1 Laurent GUERBY
19 1 Laurent GUERBY
<pre>
20 1 Laurent GUERBY
apt-get install nut
21 1 Laurent GUERBY
# edit /etc/nut/upsd.users to add
22 1 Laurent GUERBY
[admin]
23 1 Laurent GUERBY
	password = mypass
24 1 Laurent GUERBY
	actions = SET
25 1 Laurent GUERBY
	instcmds = ALL
26 1 Laurent GUERBY
# edit /etc/nut/nut.conf to add
27 1 Laurent GUERBY
MODE=standalone
28 1 Laurent GUERBY
# edit /etc/nut/ups.conf to add
29 1 Laurent GUERBY
[pw]
30 1 Laurent GUERBY
        driver = blazer_usb
31 1 Laurent GUERBY
	port = /dev/hidraw0
32 1 Laurent GUERBY
	vendorid = 0665
33 1 Laurent GUERBY
	productid = 5161
34 1 Laurent GUERBY
# Then
35 1 Laurent GUERBY
/etc/init.d/nut restart
36 1 Laurent GUERBY
</pre>
37 1 Laurent GUERBY
38 1 Laurent GUERBY
Commandes :
39 1 Laurent GUERBY
40 1 Laurent GUERBY
<pre>
41 1 Laurent GUERBY
# upsc -l
42 1 Laurent GUERBY
pw
43 1 Laurent GUERBY
# upsc pw
44 1 Laurent GUERBY
battery.voltage: 13.50
45 1 Laurent GUERBY
battery.voltage.nominal: 12.0
46 1 Laurent GUERBY
beeper.status: enabled
47 1 Laurent GUERBY
device.type: ups
48 1 Laurent GUERBY
driver.name: blazer_usb
49 1 Laurent GUERBY
driver.parameter.pollinterval: 2
50 1 Laurent GUERBY
driver.parameter.port: /dev/hidraw0
51 1 Laurent GUERBY
driver.parameter.productid: 5161
52 1 Laurent GUERBY
driver.parameter.vendorid: 0665
53 1 Laurent GUERBY
driver.version: 2.4.3
54 1 Laurent GUERBY
driver.version.internal: 0.03
55 1 Laurent GUERBY
input.current.nominal: 2.0
56 1 Laurent GUERBY
input.frequency: 50.0
57 1 Laurent GUERBY
input.frequency.nominal: 50
58 1 Laurent GUERBY
input.voltage: 231.5
59 1 Laurent GUERBY
input.voltage.fault: 231.5
60 1 Laurent GUERBY
input.voltage.nominal: 230
61 1 Laurent GUERBY
output.voltage: 231.5
62 1 Laurent GUERBY
ups.delay.shutdown: 30
63 1 Laurent GUERBY
ups.delay.start: 180
64 1 Laurent GUERBY
ups.load: 2
65 1 Laurent GUERBY
ups.productid: 5161
66 1 Laurent GUERBY
ups.status: OL
67 1 Laurent GUERBY
ups.type: offline / line interactive
68 1 Laurent GUERBY
ups.vendorid: 0665
69 1 Laurent GUERBY
# upscmd -u admin -p mypass -l  pw 
70 1 Laurent GUERBY
Instant commands supported on UPS [pw]:
71 1 Laurent GUERBY
72 1 Laurent GUERBY
beeper.toggle - Toggle the UPS beeper
73 1 Laurent GUERBY
load.off - Turn off the load immediately
74 1 Laurent GUERBY
load.on - Turn on the load immediately
75 1 Laurent GUERBY
shutdown.return - Turn off the load and return when power is back
76 1 Laurent GUERBY
shutdown.stayoff - Turn off the load and remain off
77 1 Laurent GUERBY
shutdown.stop - Stop a shutdown in progress
78 1 Laurent GUERBY
test.battery.start - Start a battery test
79 1 Laurent GUERBY
test.battery.start.deep - Start a deep battery test
80 1 Laurent GUERBY
test.battery.start.quick - Start a quick battery test
81 1 Laurent GUERBY
test.battery.stop - Stop the battery test
82 1 Laurent GUERBY
# upscmd -u admin -p mypass  pw beeper.toggle
83 1 Laurent GUERBY
# upscmd -u admin -p mypass pw shutdown.return
84 1 Laurent GUERBY
# upscmd -u admin -p mypass  pw load.off
85 1 Laurent GUERBY
# upscmd -u admin -p mypass  pw load.on
86 1 Laurent GUERBY
# upscmd -u admin -p mypass  pw test.battery.start.quick
87 1 Laurent GUERBY
</pre>
88 1 Laurent GUERBY
89 1 Laurent GUERBY
La commande shutdown.return coupe la charge pendant 3 minutes environ et donc permet un reboot a distance des equipements sur l'onduleur.
90 1 Laurent GUERBY
91 1 Laurent GUERBY
Quand l'electricité n'est plus disponible ups.status pas a "OB" et battery.voltage decroit par palier de 0.1V. ups.load donne la charge approximative en %.
92 1 Laurent GUERBY
93 1 Laurent GUERBY
L'onduleur revient bien en ligne si on épuise les batteries mais qu'on remet le courant.
94 1 Laurent GUERBY
95 1 Laurent GUERBY
Tiens plus d'une heure sur une charge de 20 Watt.
96 1 Laurent GUERBY
97 2 Laurent GUERBY
h2. DC-DC
98 2 Laurent GUERBY
99 2 Laurent GUERBY
Avec controle USB via obinou : http://www.mini-box.com/DCDC-USB
100 3 Laurent GUERBY
http://www.cartft.com/catalog/il/1114
101 2 Laurent GUERBY
102 1 Laurent GUERBY
h2. Autre
103 1 Laurent GUERBY
104 1 Laurent GUERBY
TODO