Piles au methanol pour les caravanes avec un modele en vente (ebay & boutiques meme sur Toulouse) autour de 2000 euros pour 25W (12V * 2A) de capacitÃ©, petite boite 43,5 x 20,0 x 27,6 cm / 6.5 kg et 0.9 litre de methanol par kWh produit. A 10W cela fait 45 jours d'autonomie pour 40 euros la recharge de 10 litres.

Eolien¶

http://hacknmod.com/hack/diy-wind-energy-green-electricity-turbine/
http://www.aerial.net/shop/index.php?cPath=104
http://www.aerial.net/shop/product/1101/macrowind-400w-12v-6-blades.html
- http://french.alibaba.com/product-gs/small-wind-turbine-321651845.html
Test de petites eoliennes http://www.bettergeneration.com/green-energy-reviews.html
En haute garonne installateur vendeur : http://www.krugwind.com/
Test SEPEN http://www.sepen-montplaisir.fr/
http://fr.wikipedia.org/wiki/Petit_%C3%A9olien
http://eolienne-petite.com/
http://www.econologie.com/forums/energies-renouvelables-eolien-hydraulique-geothermie-energies-marines-biomasse-et-biogaz-vf39.html
VAWT Vertical Axis Wind Turbine
- http://www.galeforce.eu/index.php?article_id=1&clang=1&climazones=dry
http://greenterrafirma.com/wind%20turbines.html
- Power AVAILABLE in the wind = .5 x air density x swept area x (wind velocity cubed)
  Air density = 1.23 kg per cubic meter at sea level. Swept area = pi x r squared. Our 2 foot blades = 0.609m, 4 ft = 1.219m. 10 mph = 4.4704 m/s, 20 mph = 8.9408 m/s.
  10 mph = 16.09344 kph
  10 feet = 3.04800 meters
  How much power is in the wind:
  2 ft blade, 10 mph winds = .5 x 1.23 x 3.14x0.609squared x4.4704 cubed = .5 x 1.23 x 1.159 x 89.338 = 63.7 watts
  With 4 foot blades and 10 mph winds = .5 x 1.23 x 4.666 x 89.338 = 256 watts
  With 4 foot blades and 20 mph winds = .5 x 1.23 x 4.666 x 714.708 = 2051 watts
  That's the MAXIMUM power in the wind. However, it's impossible to harvest ALL the power. The Betz Limit tells us that the maximum percentage of power we can harvest from the wind is 59.26%.
  Thus our maximum power from these turbines would be:
  2 ft blades, 10 mph wind = 37.7 watts
  4 ft blades, 10 mph wind = 152 watts
  4 ft blades, 20 mph wind = 1,215 watts

Stirling¶

http://www.solarfire.org/SWEE-Technologies,129

Forums¶

Solutions radio¶

Technologie¶

Cell Type: The type of silicon that comprises a specific cell, based on the cell manufacturing process. Each cell type has pros and cons. Monocrystalline PV cells are the most expensive and energy intensive to produce but usually yield the highest efficiencies. Though polycrystalline and ribbon silicon cells are slightly less energy intensive and less expensive to produce, these cells are slightly less efficient than monocrystalline cells. However, because both poly- and ribbon silicon panels leave fewer gaps on the panel surface (due to square or rectangular cell shapes), these panels can often offer about the same power density as monocrystalline modules. Thin-film panels, such as those made from amorphous silicon cells, are the least expensive to produce and require the least amount of energy and raw materials, but are the least efficient of the cell types. They require about twice as much space to produce the same power as mono-, poly-, or ribbon-silicon panels. Thin-film panels do have better shade tolerance and high-temperature performance but are often more expensive to install because of their lower power density.
Sanyoâs "bifacial" HIT panels are composed of a monocrystalline cell and a thin layer of amorphous silicon material. In addition to generating power from the direct rays of the sun on the panel face, this hybrid panel can produce power from reflected light on its underside, increasing overall panel efficiency.
Cells in Series: Number of individual PV cells wired in series, which determines the panel design voltage. Crystalline PV cells operate at about 0.5V. When cells are wired in series, the voltage of each cell is additive. For example, a panel that has 36 cells in series has a maximum power voltage (Vmp) of about 18V. Why 36? Historically, panels known as 12V were designed to push power into 12V batteries. But to deliver the 12V, they needed to have enough excess voltage (electrical pressure) to compensate for the voltage loss due to high temperature conditions. Panels with 36 ("12V") or 72 ("24V") cells are designed for battery-charging applications.
Panels with other numbers of cells in series are intended for use in grid-tied systems. Due to the increased availability of step-down/MPPT battery charge controllers, grid-tied panel

Misc¶

Il faudra sans doute 50 a 100W de panneau photovoltaique pour un relai, on trouve du 90W amorphe pour 121 euros livrÃ©s :

http://www.ebay.de/itm/Schott-Solar-ASI-90-Dunnschicht-Solarmodul-/250927063886?pt=Solaranlagen&hash=item3a6c6b234e#ht_500wt_1413

20kg de batterie (100 euros) + panneau (121 euros) + regulateur (50 ?) + matos wifi et antennes (300 ?) ~ 600 euros.

http://www.interprojekt.com.pl/mikrotik-routerboard-level-64mb-3xlan-3xminipci-p-394.html
http://www.interprojekt.com.pl/mikrotik-routerboard-r52nm-minipci-p-898.html
http://www.interprojekt.com.pl/mikrotik-routerboard-r52hn-300mbps-80211abgn-high-p-745.html
MIMO et dual 2.4/5.5

Une solution alternative :

- un routerboard a la place du switch
- un cable pieuvre power jack 1 femelle vers 8 males
- une alimentation de portable 19V 3.42A
- un splitter PoE passif
- des injecteurs PoE passif

http://shop.varia-store.com/product_info.php?info=p1052_MikroTik-RouterBOARD-750--RB750--RB-750--Level-4-300-MHz.html
http://cgi.ebay.com/DC-1-8-Power-Cable-CCTV-Camera-DVR-Save-Adapter-/320442726434?pt=LH_DefaultDomain_0&hash=item4a9bdff822
http://cgi.ebay.com/PoE-Power-Over-Ethernet-Injector-Splitter-Adpater-Kit-/120719762126?pt=LH_DefaultDomain_0&hash=item1c1b7562ce
http://cgi.ebay.com/Acer-Notebook-AC-Adapter-Charger-19V-3-42A-5-5mm-2-1mm-/270686346419?pt=Laptop_Adapters_Chargers&hash=item3f0629dcb3

L'avantage du routerboard est qu'il accepte 9 a 28V DC en alimentation donc a peu pres comme les ubiquity et que ses temperatures de fonctionnement sont tres larges de -40 a +55C.
La doc du routerboard n'est pas tres claire sur la taille du power jack est-ce 5.5/2.0 ou le plus standard 5.5/2.1 ?

Fichiers

Projet

Général

Profil

Wiki

Observateurs (2)

Relais Autonome » Historique » Version 88

Relais Autonome¶

DonnÃ©es¶

Systemes¶

Liens¶

Mats¶

Panneaux solaires¶

Photovoltaique amorphe¶

Batteries¶

Remote Power Control¶

UPS DC¶

Piles a combustible¶