• Contenu
• Routage
• Adressage
• Migration

Routage¶

Coté Adhérent-e :

# IPv4 Adherent
ip addr add IP/32 dev eth0
ip route add default via 91.224.148.0 dev eth0 onlink

# IPv6 adherent
ip -6 addr add fe80::XX:YY/64 dev eth0
ip -6 route add default via fe80::31 dev eth0
ip -6 addr add IP/NN...

Et coté routeur :

# IPv4 routeur
ip addr add 91.224.148.0/32 dev lo 
ip route add IP/32 dev eth0.NNN

# IPv6 routeur
ip -6 addr add fe80::31/64 dev eth0.NNN
ip route add IP/56 vi fe80:XX:YY dev eth0.NNN

Adressage¶

PA 2a01:6600:8000::/40 LIR fullsave
2a01:6600:8080:HH00::/56 => 91.224.148.DDD fe80::80:HH PI tetaneutral.net
2a01:6600:8081:HH00::/56 => 91.224.149.DDD fe80::81:HH PI tetaneutral.net
2a01:6600:8082:HH00::/56 => 80.67.182.DDD  fe80::82:HH PA gitoyen
2a01:6600:8083:HH00::/56 => 89.234.156.DDD fe80::83:HH PA opdop
2a01:6600:8084:HH00::/56 => 89.234.157.DDD fe80::84:HH PA opdop
TODO 185.119.168.0/22 = 4 plages /24, 85 86 87 88

PA 2a03:7220::/32 LIR tetaneutral.net
2a03:7220:8080:HH00::/56 => 91.224.148.DDD fe80::80:HH
...

Migration¶

91.224.149.DDD/24 gw 91.224.149.254
=>
91.224.149.DDD/32 gw 91.224.148.0 onlink

Sur VM

# cat /etc/network/interfaces
auto lo
iface lo inet loopback
auto eth0
iface eth0 inet6 static
    pre-up /sbin/sysctl -w net.ipv6.conf.eth0.accept_ra=0
    pre-up /sbin/sysctl -w net.ipv6.conf.eth0.autoconf=0
    up ip addr add fe80::YY:XX/64 dev eth0
    address 2a01:6600:80YY:XX00::1
    netmask 56
    gateway fe80::31

iface eth0 inet manual
    up ip link set eth0 up
    down ip link set eth0 down
    pre-up /sbin/sysctl -w net.ipv6.conf.eth0.accept_ra=0
    pre-up /sbin/sysctl -w net.ipv6.conf.eth0.autoconf=0
    up ip addr add 91.224.148.DDD/32 dev eth0
    up ip route add 91.224.148.0/32 dev eth0
    up ip route add default via 91.224.148.0
    down ip route flush dev eth0
    down ip addr flush dev eth0