Projet

Général

Profil

NXOS » Historique » Version 34

Laurent GUERBY, 07/10/2018 15:21

1 20 Laurent GUERBY
{{>toc}}
2 20 Laurent GUERBY
3 1 Matthieu Herrb
h1. NXOS
4 1 Matthieu Herrb
5 11 Laurent GUERBY
Cisco Nexus 3064X
6 30 Laurent GUERBY
version @7.0(3)I4(7)@
7 1 Matthieu Herrb
8 10 Laurent GUERBY
Voir aussi https://www.grenode.net/Documentation_technique/Machines/kraken/
9 10 Laurent GUERBY
10 21 Laurent GUERBY
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus3000/sw/fundamentals/503_U3_1/b_Nexus_3000_Fundamentals_Guide_Release_503_U3_1.pdf
11 18 Laurent GUERBY
12 31 Laurent GUERBY
h2. Password
13 31 Laurent GUERBY
14 31 Laurent GUERBY
<pre>
15 31 Laurent GUERBY
conf t
16 31 Laurent GUERBY
username admin password LEPASSWORD
17 31 Laurent GUERBY
exit
18 31 Laurent GUERBY
copy run start
19 31 Laurent GUERBY
</pre>
20 31 Laurent GUERBY
21 1 Matthieu Herrb
h2. Interface de management out-of-band
22 1 Matthieu Herrb
23 9 Laurent GUERBY
* n3064a Adresse: 192.168.129.46
24 31 Laurent GUERBY
* n3064b Adresse: 192.168.129.45
25 31 Laurent GUERBY
* n3064c Adresse: 192.168.129.44
26 9 Laurent GUERBY
27 9 Laurent GUERBY
<pre>
28 9 Laurent GUERBY
interface mgmt0
29 9 Laurent GUERBY
  vrf member management
30 9 Laurent GUERBY
  ip address 192.168.129.46/24
31 9 Laurent GUERBY
32 9 Laurent GUERBY
</pre>
33 1 Matthieu Herrb
34 1 Matthieu Herrb
h2. Commandes
35 1 Matthieu Herrb
36 1 Matthieu Herrb
h3. Sauvegarde config 
37 1 Matthieu Herrb
38 1 Matthieu Herrb
<pre>
39 1 Matthieu Herrb
nexus# copy run start
40 1 Matthieu Herrb
</pre>
41 1 Matthieu Herrb
42 1 Matthieu Herrb
Copie via scp
43 1 Matthieu Herrb
44 1 Matthieu Herrb
<pre>
45 1 Matthieu Herrb
nexus# copy run scp://matthieu@192.168.129.1/
46 1 Matthieu Herrb
</pre>
47 1 Matthieu Herrb
48 25 Laurent GUERBY
h3. Passwordless ssh
49 25 Laurent GUERBY
50 25 Laurent GUERBY
<pre>
51 27 Laurent GUERBY
n3064a# show user-account 
52 27 Laurent GUERBY
user:admin
53 27 Laurent GUERBY
        this user account has no expiry date
54 27 Laurent GUERBY
        roles:network-admin 
55 25 Laurent GUERBY
conf t
56 25 Laurent GUERBY
username admin sshkey ssh-rsa AAAA...
57 26 Laurent GUERBY
</pre>
58 25 Laurent GUERBY
59 25 Laurent GUERBY
Ensuite :
60 25 Laurent GUERBY
61 25 Laurent GUERBY
<pre>
62 25 Laurent GUERBY
(echo conf t;echo int e1/42;echo switchport access vlan 3189) |ssh n3064a
63 25 Laurent GUERBY
</pre>
64 25 Laurent GUERBY
65 1 Matthieu Herrb
h3. Config interface
66 1 Matthieu Herrb
67 1 Matthieu Herrb
<pre>
68 1 Matthieu Herrb
nexus# conf t
69 1 Matthieu Herrb
nexus(config)# interface ethernet 1/3
70 1 Matthieu Herrb
nexus(config-if)# switchport mode trunk
71 1 Matthieu Herrb
nexus(config-if)# exit
72 1 Matthieu Herrb
nexus(config)# exit
73 1 Matthieu Herrb
nexus#
74 1 Matthieu Herrb
</pre>
75 1 Matthieu Herrb
76 1 Matthieu Herrb
pour un vlan non taggé
77 1 Matthieu Herrb
<pre>
78 1 Matthieu Herrb
nexus(config-if)# switchport access vlan 3131
79 1 Matthieu Herrb
</pre>
80 1 Matthieu Herrb
81 2 Matthieu Herrb
h3. Etat des interfaces
82 3 Matthieu Herrb
83 1 Matthieu Herrb
<pre>
84 1 Matthieu Herrb
nexus# sh int status
85 1 Matthieu Herrb
nexus# sh int transceiver
86 1 Matthieu Herrb
nexus# sh int ethernet 1/1
87 16 Sebastien Badia
# Afficher le DOM d'une optique
88 16 Sebastien Badia
nexus# sh int Eth 1/1 tran de
89 1 Matthieu Herrb
</pre>
90 1 Matthieu Herrb
</pre>
91 2 Matthieu Herrb
92 1 Matthieu Herrb
h3. Boot
93 1 Matthieu Herrb
94 32 Laurent GUERBY
Si ça tombe dans le loader :
95 32 Laurent GUERBY
96 32 Laurent GUERBY
<pre>
97 32 Laurent GUERBY
loader> dir
98 32 Laurent GUERBY
bootflash:
99 32 Laurent GUERBY
  sprom_3_0_0 
100 32 Laurent GUERBY
  nxos.7.0.3.I7.2.bin 
101 32 Laurent GUERBY
  mts.log 
102 32 Laurent GUERBY
  sprom_cstruct_2_0_0 
103 32 Laurent GUERBY
  vdc_2 
104 32 Laurent GUERBY
  vdc_3 
105 32 Laurent GUERBY
  vdc_4 
106 32 Laurent GUERBY
  virt_strg_pool_bf 
107 32 Laurent GUERBY
  logflash 
108 32 Laurent GUERBY
  license_FOC1636R174_23.lic 
109 32 Laurent GUERBY
  virtual-instance 
110 32 Laurent GUERBY
  sprom_cstruct_3_0_0 
111 32 Laurent GUERBY
  20120525_150205_poap_3968_init.log 
112 32 Laurent GUERBY
  sprom_2_0_1 
113 32 Laurent GUERBY
  n3000-uk9-kickstart.6.0.2.U6.2a.bin 
114 32 Laurent GUERBY
  platform-sdk.cmd 
115 32 Laurent GUERBY
  scripts 
116 32 Laurent GUERBY
  n3000-uk9.6.0.2.U6.2a.bin 
117 32 Laurent GUERBY
  20120717_161025_poap_13595_init.log 
118 32 Laurent GUERBY
loader> boot bootflash:nxos.7.0.3.I7.2.bin
119 32 Laurent GUERBY
</pre>
120 32 Laurent GUERBY
121 33 Laurent GUERBY
Pour rendre permanent choisir la version donnée par dir "nxos...XXX.bin" puis :
122 32 Laurent GUERBY
123 1 Matthieu Herrb
<pre>
124 1 Matthieu Herrb
nexus# conf t
125 33 Laurent GUERBY
nexus(config)# boot nxos bootflash:/nxos.7.0.3.XXX.bin 
126 1 Matthieu Herrb
nexus(config)# boot order bootflash
127 1 Matthieu Herrb
nexus(config)# exit
128 1 Matthieu Herrb
nexus#
129 4 Matthieu Herrb
</pre>
130 4 Matthieu Herrb
131 15 Sebastien Badia
h3. Features et Misc
132 8 Laurent GUERBY
133 1 Matthieu Herrb
<pre>
134 15 Sebastien Badia
# Pour dire au switch d'accepter n'importe quel type de SFP
135 1 Matthieu Herrb
service unsupported-transceiver
136 15 Sebastien Badia
# Autoriser le switch à avoir une IP sur une interface VLAN
137 15 Sebastien Badia
feature interface-vlan
138 15 Sebastien Badia
# Activer les features LACP
139 15 Sebastien Badia
feature lacp
140 15 Sebastien Badia
# Activer la possiblité de faire du LLDP
141 15 Sebastien Badia
feature lldp
142 15 Sebastien Badia
# Mettre tous les ports en shutdown par défaut (penser à activer le port lors de la configuration avec un 'no shutdown'
143 15 Sebastien Badia
system default switchport shutdown
144 15 Sebastien Badia
</pre>
145 15 Sebastien Badia
146 15 Sebastien Badia
h3. Misc
147 15 Sebastien Badia
148 15 Sebastien Badia
<pre>
149 8 Laurent GUERBY
no password strength-check
150 8 Laurent GUERBY
151 13 Laurent GUERBY
nexus# sh mac address-table 
152 13 Laurent GUERBY
153 13 Laurent GUERBY
nexus# sh environment
154 13 Laurent GUERBY
(...) 
155 13 Laurent GUERBY
Temperature:
156 13 Laurent GUERBY
-------------------------------------------------------------------------
157 13 Laurent GUERBY
Module  Sensor             MajorThresh   MinorThres   CurTemp     Status 
158 13 Laurent GUERBY
                           (Celsius)     (Celsius)   (Celsius)           
159 13 Laurent GUERBY
-------------------------------------------------------------------------
160 13 Laurent GUERBY
1        Back-Right (D0)   70            44            33         Ok             
161 13 Laurent GUERBY
1        Back-Left  (D1)   70            42            29         Ok             
162 13 Laurent GUERBY
1        Front-Right(D2)   70            47            32         Ok             
163 13 Laurent GUERBY
1        Front-Left (D3)   70            49            30         Ok         
164 13 Laurent GUERBY
165 14 Laurent GUERBY
nexus# sh int e1/1 cap
166 14 Laurent GUERBY
nexus# sh int e1/1 tra det
167 14 Laurent GUERBY
168 1 Matthieu Herrb
169 1 Matthieu Herrb
# TODO verifier
170 1 Matthieu Herrb
conf t
171 1 Matthieu Herrb
int eth1/4
172 1 Matthieu Herrb
switchport trunk allowed vlan xxx
173 1 Matthieu Herrb
switchport trunk native vlan nnn
174 1 Matthieu Herrb
</pre>
175 19 Laurent GUERBY
176 22 Laurent GUERBY
h3. NTP
177 22 Laurent GUERBY
178 22 Laurent GUERBY
Client de nagios :
179 22 Laurent GUERBY
180 22 Laurent GUERBY
<pre>
181 22 Laurent GUERBY
conf t
182 22 Laurent GUERBY
ntp server 192.168.3.7
183 22 Laurent GUERBY
ntp source-interface  Vlan3175
184 22 Laurent GUERBY
</pre>
185 22 Laurent GUERBY
186 19 Laurent GUERBY
h3. 40G
187 19 Laurent GUERBY
188 19 Laurent GUERBY
40G <=> 4x10G reboot necessaire
189 19 Laurent GUERBY
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus3000/sw/interfaces/6_x/b_Cisco_n3k_Interfaces_Configuration_Guide_602_U11/b_Cisco_n3k_Interfaces_Configuration_Guide_602_U11_chapter_010.html
190 19 Laurent GUERBY
191 19 Laurent GUERBY
<pre>
192 19 Laurent GUERBY
conf t
193 19 Laurent GUERBY
hardware profile portmode 48x10g+4x40g
194 19 Laurent GUERBY
exit
195 19 Laurent GUERBY
reload
196 19 Laurent GUERBY
</pre>
197 19 Laurent GUERBY
198 34 Laurent GUERBY
4x4x10G :
199 19 Laurent GUERBY
200 19 Laurent GUERBY
<pre>
201 1 Matthieu Herrb
hardware profile portmode 64x10G
202 34 Laurent GUERBY
</pre>
203 34 Laurent GUERBY
204 34 Laurent GUERBY
4x10G (port 49) + 3x40G (port 50-52)
205 34 Laurent GUERBY
<pre>
206 34 Laurent GUERBY
hardware profile portmode 52x10G+3x40G
207 19 Laurent GUERBY
</pre>
208 19 Laurent GUERBY
209 24 Laurent GUERBY
h3. MPLS
210 8 Laurent GUERBY
211 24 Laurent GUERBY
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus3000/sw/label_switching/7x/b_Cisco_Nexus_3000_Series_NX-OS_Label_Switching_Configuration_Guide_7x/b_Cisco_Nexus_3000_Series_NX-OS_Label_Switching_Configuration_Guide_7x_chapter_010.html
212 24 Laurent GUERBY
<pre>
213 24 Laurent GUERBY
n3064a# show feature-set 
214 24 Laurent GUERBY
Feature Set Name      ID        State   
215 24 Laurent GUERBY
--------------------  --------  --------
216 24 Laurent GUERBY
fex                    3          uninstalled
217 24 Laurent GUERBY
mpls                   4          uninstalled
218 24 Laurent GUERBY
fabric                 7          uninstalled
219 24 Laurent GUERBY
fcoe-npv               8          uninstalled
220 24 Laurent GUERBY
</pre>
221 24 Laurent GUERBY
222 24 Laurent GUERBY
Linux
223 24 Laurent GUERBY
<pre>
224 24 Laurent GUERBY
20180312 09:09:57<guerby> test du lundi matin sur kernel 4.16-rc4 avec iproute2 4.15.0:  ip route add 10.1.1.0/30 encap mpls 200/300 dev eth0 et tcpdump donne
225 24 Laurent GUERBY
20180312 09:09:59<guerby> 09:07:56.394863 70:85:c2:3a:17:2a > ff:ff:ff:ff:ff:ff, ethertype MPLS unicast (0x8847), length 106: MPLS (label 200, exp 0, ttl 64) (label 300, exp 0, [S], ttl 64) 91.224.148.12 > 10.1.1.1: ICMP echo request, id 25171, seq 37, length 64
226 24 Laurent GUERBY
</pre>
227 24 Laurent GUERBY
228 4 Matthieu Herrb
h2. Infos
229 4 Matthieu Herrb
230 4 Matthieu Herrb
<pre>
231 4 Matthieu Herrb
nexus# sh version
232 4 Matthieu Herrb
Cisco Nexus Operating System (NX-OS) Software
233 4 Matthieu Herrb
TAC support: http://www.cisco.com/tac
234 4 Matthieu Herrb
Copyright (C) 2002-2017, Cisco and/or its affiliates.
235 4 Matthieu Herrb
All rights reserved.
236 4 Matthieu Herrb
The copyrights to certain works contained in this software are
237 4 Matthieu Herrb
owned by other third parties and used and distributed under their own
238 4 Matthieu Herrb
licenses, such as open source.  This software is provided "as is," and unless
239 4 Matthieu Herrb
otherwise stated, there is no warranty, express or implied, including but not
240 4 Matthieu Herrb
limited to warranties of merchantability and fitness for a particular purpose.
241 4 Matthieu Herrb
Certain components of this software are licensed under
242 4 Matthieu Herrb
the GNU General Public License (GPL) version 2.0 or 
243 4 Matthieu Herrb
GNU General Public License (GPL) version 3.0  or the GNU
244 4 Matthieu Herrb
Lesser General Public License (LGPL) Version 2.1 or 
245 4 Matthieu Herrb
Lesser General Public License (LGPL) Version 2.0. 
246 4 Matthieu Herrb
A copy of each such license is available at
247 4 Matthieu Herrb
http://www.opensource.org/licenses/gpl-2.0.php and
248 4 Matthieu Herrb
http://opensource.org/licenses/gpl-3.0.html and
249 4 Matthieu Herrb
http://www.opensource.org/licenses/lgpl-2.1.php and
250 4 Matthieu Herrb
http://www.gnu.org/licenses/old-licenses/library.txt.
251 4 Matthieu Herrb
252 4 Matthieu Herrb
Software
253 4 Matthieu Herrb
  BIOS: version 4.0.0
254 4 Matthieu Herrb
  NXOS: version 7.0(3)I4(7)
255 4 Matthieu Herrb
  BIOS compile time:  12/05/2016
256 4 Matthieu Herrb
  NXOS image file is: bootflash:///nxos.7.0.3.I4.7.bin
257 4 Matthieu Herrb
  NXOS compile time:  6/28/2017 14:00:00 [06/28/2017 21:53:29]
258 4 Matthieu Herrb
259 4 Matthieu Herrb
260 4 Matthieu Herrb
Hardware
261 4 Matthieu Herrb
  cisco Nexus3000 C3064PQ Chassis 
262 4 Matthieu Herrb
  Intel(R) Celeron(R) CPU        P4505  @ 1.87GHz with 3903284 kB of memory.
263 4 Matthieu Herrb
  Processor Board ID FOC17342TSZ
264 4 Matthieu Herrb
265 4 Matthieu Herrb
  Device name: nexus
266 4 Matthieu Herrb
  bootflash:    1638000 kB
267 4 Matthieu Herrb
  usb1:               0 kB (expansion flash)
268 4 Matthieu Herrb
269 4 Matthieu Herrb
Kernel uptime is 0 day(s), 2 hour(s), 10 minute(s), 12 second(s)
270 4 Matthieu Herrb
271 4 Matthieu Herrb
Last reset at 335975 usecs after  Wed Feb 14 15:25:27 2018
272 4 Matthieu Herrb
273 4 Matthieu Herrb
  Reason: Reset Requested by CLI command reload
274 4 Matthieu Herrb
  System version: 7.0(3)I4(7)
275 4 Matthieu Herrb
  Service: 
276 4 Matthieu Herrb
277 4 Matthieu Herrb
plugin
278 4 Matthieu Herrb
  Core Plugin, Ethernet Plugin
279 4 Matthieu Herrb
280 4 Matthieu Herrb
Active Package(s):
281 5 Matthieu Herrb
282 12 Laurent GUERBY
nexus# sh inventory all
283 5 Matthieu Herrb
NAME: "Chassis",  DESCR: "Nexus3000 C3064PQ Chassis"             
284 5 Matthieu Herrb
PID: N3K-C3064PQ-10GX    ,  VID: V01 ,  SN: FOC1734R15F          
285 5 Matthieu Herrb
286 5 Matthieu Herrb
NAME: "Slot 1",  DESCR: "48x10GE + 4x40G Supervisor"            
287 5 Matthieu Herrb
PID: N3K-C3064PQ-10GX    ,  VID: V01 ,  SN: FOC17342TSZ          
288 5 Matthieu Herrb
289 5 Matthieu Herrb
NAME: "Power Supply 1",  DESCR: "Nexus3000 C3064PQ Chassis Power Supply"
290 5 Matthieu Herrb
PID: N2200-PAC-400W      ,  VID: V04 ,  SN: DTN1733P0VH          
291 5 Matthieu Herrb
292 5 Matthieu Herrb
NAME: "Power Supply 2",  DESCR: "Nexus3000 C3064PQ Chassis Power Supply"
293 5 Matthieu Herrb
PID: N2200-PAC-400W      ,  VID: V04 ,  SN: DTN1733P0UK          
294 5 Matthieu Herrb
295 5 Matthieu Herrb
NAME: "Fan 1",  DESCR: "Nexus3000 C3064PQ Chassis Fan Module"  
296 1 Matthieu Herrb
PID: N3K-C3064-FAN-F     ,  VID: V00 ,  SN: N/A                  
297 12 Laurent GUERBY
298 12 Laurent GUERBY
NAME: Ethernet1/1,  DESCR: FiberStore                              
299 12 Laurent GUERBY
PID: SFP-H10GB-ACU10M    ,  VID: SFP-10G-AOC     ,  SN: F176CO35764-1    
300 23 Laurent GUERBY
301 23 Laurent GUERBY
nexus# sh license 
302 23 Laurent GUERBY
license_FOC1734R15F_12_1.lic:
303 23 Laurent GUERBY
SERVER this_host ANY
304 23 Laurent GUERBY
VENDOR cisco
305 23 Laurent GUERBY
FEATURE LAN_BASE_SERVICES_PKG cisco 1.0 permanent uncounted \
306 23 Laurent GUERBY
        VENDOR_STRING=<LIC_SOURCE>NEXUS_PRODUCTION</LIC_SOURCE><SKU>N3K-BAS1K9</SKU> \
307 23 Laurent GUERBY
        HOSTID=VDH=FOC1734R15F \
308 23 Laurent GUERBY
        NOTICE=<LicFileID>20131030222602000</LicFileID><LicLineID>1</LicLineID><PAK>N3K-C3064PQ-10GXFOC1734R15F</PAK> \
309 23 Laurent GUERBY
        SIGN=BBF8EBE2F7B6
310 23 Laurent GUERBY
FEATURE LAN_ENTERPRISE_SERVICES_PKG cisco 1.0 permanent uncounted \
311 23 Laurent GUERBY
        VENDOR_STRING=<LIC_SOURCE>NEXUS_PRODUCTION</LIC_SOURCE><SKU>N3K-LAN1K9</SKU> \
312 23 Laurent GUERBY
        HOSTID=VDH=FOC1734R15F \
313 23 Laurent GUERBY
        NOTICE=<LicFileID>20131030222602000</LicFileID><LicLineID>2</LicLineID><PAK>N3K-C3064PQ-10GXFOC1734R15F</PAK> \
314 23 Laurent GUERBY
        SIGN=FF75EB18A86E
315 23 Laurent GUERBY
316 23 Laurent GUERBY
</pre>
317 23 Laurent GUERBY
318 28 Laurent GUERBY
h2. Boot log
319 28 Laurent GUERBY
320 28 Laurent GUERBY
screen /dev/ttyUSB0 9600 8n1
321 28 Laurent GUERBY
322 28 Laurent GUERBY
A la question entrer "skip" puis login "admin" password vide.
323 28 Laurent GUERBY
324 28 Laurent GUERBY
<pre>
325 28 Laurent GUERBY
Press  ctrl L to go to loader prompt in 2 secs
326 28 Laurent GUERBY
327 28 Laurent GUERBY
Booting kickstart image: bootflash:/nxos.7.0.3.I7.2.bin
328 28 Laurent GUERBY
CardIndex = 11060
329 28 Laurent GUERBY
 Image valid
330 28 Laurent GUERBY
graphics_set_kernel_params enter: 
331 28 Laurent GUERBY
Installing klm_card_index
332 28 Laurent GUERBY
done
333 28 Laurent GUERBY
INIT: version 2.88 booting
334 28 Laurent GUERBY
Skipping ata_piix install for n3k.
335 28 Laurent GUERBY
Unsquashing rootfs ...
336 28 Laurent GUERBY
Removing libcrdcfgdata and linking libcrdcfgdata3nk
337 28 Laurent GUERBY
Installing isan procfs ... done.
338 28 Laurent GUERBY
Installing SSE module with card index 11060 ... done.
339 28 Laurent GUERBY
Creating SSE device node 246 ... done.
340 28 Laurent GUERBY
Loading I2C driver ... done.
341 28 Laurent GUERBY
Installing CCTRL driver for card_type 30 without NEED_GEM ... done.
342 28 Laurent GUERBY
10.20: Interrupt throttling disabled. No cctrl irq detected.
343 28 Laurent GUERBY
Loading IGB driver ... done.
344 28 Laurent GUERBY
345 28 Laurent GUERBY
Checking all filesystems.Current boot disk sda3..
346 28 Laurent GUERBY
347 28 Laurent GUERBY
Installing SPROM driver ... IS_N3K done.
348 28 Laurent GUERBY
Skipping installing default sprom values for N3k...
349 28 Laurent GUERBY
Installing pfmsvcs module with SPROM card index 11060 ... done.
350 28 Laurent GUERBY
Installing nvram module ... done.
351 28 Laurent GUERBY
Installing if_index module with port mode 1 ... done.
352 28 Laurent GUERBY
Installing fcfwd stub
353 28 Laurent GUERBY
Installing RNI lcnd ... done
354 28 Laurent GUERBY
Installing LC netdev ... done
355 28 Laurent GUERBY
Installing psdev module ... done.
356 28 Laurent GUERBY
Installing veobc module ... done.
357 28 Laurent GUERBY
Inserting OBFL module ... done.
358 28 Laurent GUERBY
Making OBFL character devices
359 28 Laurent GUERBY
Mounting OBFL pstore for mtd
360 28 Laurent GUERBY
Starting OpenBSD Secure Shell server: sshd ... done.
361 28 Laurent GUERBY
Trim files after extracting TOR files ...
362 28 Laurent GUERBY
tune2fs 1.42.1 (17-Feb-2012)
363 28 Laurent GUERBY
Setting reserved blocks percentage to 0% (0 blocks)
364 28 Laurent GUERBY
Starting portmap daemon...
365 28 Laurent GUERBY
creating NFS state directory: done
366 28 Laurent GUERBY
starting 8 nfsd kernel threads: done
367 28 Laurent GUERBY
starting mountd: done
368 28 Laurent GUERBY
starting statd: done
369 28 Laurent GUERBY
Saving image for img-sync ...
370 28 Laurent GUERBY
Loading system software
371 28 Laurent GUERBY
Installing local RPMS
372 28 Laurent GUERBY
Patch Repository Setup completed successfully
373 28 Laurent GUERBY
Creating /dev/mcelog
374 28 Laurent GUERBY
Starting mcelog daemon
375 28 Laurent GUERBY
Removing dme lib
376 28 Laurent GUERBY
Moving N3K specific syslog config file
377 28 Laurent GUERBY
INIT: Entering runlevel: 3
378 28 Laurent GUERBY
Running S93thirdparty-script...
379 28 Laurent GUERBY
380 28 Laurent GUERBY
Populating conf files for hybrid sysmgr ...
381 28 Laurent GUERBY
Removing bios-imgs and /lcimages
382 28 Laurent GUERBY
Starting hybrid sysmgr ...
383 28 Laurent GUERBY
inserting /isan/lib/modules/klm_cisco_nb.o ... done
384 28 Laurent GUERBY
Executing Prune clis.
385 28 Laurent GUERBY
2012 Jul 17 16:09:10  %$ VDC-1 %$ %USER-0-SYSTEM_MSG:  pfm_init; line 1496   - pfm
386 28 Laurent GUERBY
2012 Jul 17 16:09:11  %$ VDC-1 %$ %PLATFORM-2-PS_FAIL: Power supply 1 failed or shut down (Serial number DTN1710P431)
387 28 Laurent GUERBY
2012 Jul 17 16:09:11  %$ VDC-1 %$ %PLATFORM-2-PS_OK: Power supply 2 ok (Serial number DTN1801P09K)
388 28 Laurent GUERBY
2012 Jul 17 16:09:11  %$ VDC-1 %$ %PLATFORM-2-PS_FANOK: Fan in Power supply 2 ok
389 28 Laurent GUERBY
2012 Jul 17 16:09:11  %$ VDC-1 %$ %PLATFORM-2-PS_ABSENT: Power supply 1 is absent/shutdown, ps-redundancy might be affected
390 28 Laurent GUERBY
2012 Jul 17 16:09:11  %$ VDC-1 %$ %PLATFORM-2-PS_RED_MODE_CHG: Power supply operational redundancy mode changed to non-redundant
391 28 Laurent GUERBY
2012 Jul 17 16:09:11  %$ VDC-1 %$ %PLATFORM-2-FANMOD_FAN_OK: Fan module 1 (Fan1(sys_fan1) fan) ok
392 28 Laurent GUERBY
2012 Jul 17 16:09:11  %$ VDC-1 %$ %USER-0-SYSTEM_MSG:  before access to bkout_cfg  - clis
393 28 Laurent GUERBY
2012 Jul 17 16:09:17  %$ VDC-1 %$ netstack: Registration with cli server complete
394 28 Laurent GUERBY
2012 Jul 17 16:09:32  %$ VDC-1 %$ %USER-2-SYSTEM_MSG: ssnmgr_app_init called on ssnmgr up - aclmgr
395 28 Laurent GUERBY
2012 Jul 17 16:09:41  %$ VDC-1 %$ %USER-0-SYSTEM_MSG: end of default policer - copp
396 28 Laurent GUERBY
2012 Jul 17 16:09:52  %$ VDC-1 %$ %VDC_MGR-2-VDC_ONLINE: vdc 1 has come online 
397 28 Laurent GUERBY
Waiting for system online status before starting POAP ...
398 28 Laurent GUERBY
Starting Power On Auto Provisioning...2012 Jul 17 16:10:21 switch %$ VDC-1 %$ %ASCII-CFG-2-CONF_CONTROL: System ready
399 28 Laurent GUERBY
Done
400 28 Laurent GUERBY
401 28 Laurent GUERBY
Abort Power On Auto Provisioning [yes - continue with normal setup, skip - bypass password and basic configuration, no - continue with Power On Auto Provisioning] (yes/skip/no)[no]: 2012 Jul 17 16:10:25 switch %$ VDC-1 %$ %POAP-2-POAP_INITED: [FOC1636R174-6C:20:56:E6:D4:01] - POAP process initialized                                                                                                                                                                                                                                                   
402 28 Laurent GUERBY
2012 Jul 17 16:10:46 switch %$ VDC-1 %$ %POAP-2-POAP_INFO: [FOC1636R174-6C:20:56:E6:D4:01] - USB Initializing Success
403 28 Laurent GUERBY
2012 Jul 17 16:10:46 switch %$ VDC-1 %$ %POAP-2-POAP_INFO: [FOC1636R174-6C:20:56:E6:D4:01] - USB disk not detected
404 28 Laurent GUERBY
2012 Jul 17 16:10:46 switch %$ VDC-1 %$ last message repeated 1 time
405 28 Laurent GUERBY
2012 Jul 17 16:10:46 switch %$ VDC-1 %$ %POAP-2-POAP_DHCP_DISCOVER_START: [FOC1636R174-6C:20:56:E6:D4:01] - POAP DHCP Discover phase started
406 28 Laurent GUERBY
2012 Jul 17 16:10:46 switch %$ VDC-1 %$ %POAP-2-POAP_INFO:   - Abort Power On Auto Provisioning [yes - continue with normal setup, skip - bypass password and basic configuration, no - continue with Power On Auto Provisioning] (yes/skip/no)[no]: 
407 28 Laurent GUERBY
2012 Jul 17 16:10:46 switch %$ VDC-1 %$ %POAP-2-POAP_FAILURE: [FOC1636R174-6C:20:56:E6:D4:01] - POAP DHCP discover phase failed
408 28 Laurent GUERBY
2012 Jul 17 16:10:48 switch %$ VDC-1 %$ %POAP-2-POAP_INFO:   - Abort Power On Auto Provisioning [yes - continue with normal setup, skip - bypass password and basic configuration, no - continue with Power On Auto Provisioning] (yes/skip/no)[no]: 
409 28 Laurent GUERBY
2012 Jul 17 16:10:51 switch %$ VDC-1 %$ %POAP-2-POAP_INFO: [FOC1636R174-6C:20:56:E6:D4:01] - USB Initializing Success
410 28 Laurent GUERBY
2012 Jul 17 16:10:51 switch %$ VDC-1 %$ %POAP-2-POAP_INFO: [FOC1636R174-6C:20:56:E6:D4:01] - USB disk not detected
411 28 Laurent GUERBY
2012 Jul 17 16:10:51 switch %$ VDC-1 %$ last message repeated 1 time
412 28 Laurent GUERBY
2012 Jul 17 16:10:51 switch %$ VDC-1 %$ %POAP-2-POAP_DHCP_DISCOVER_START: [FOC1636R174-6C:20:56:E6:D4:01] - POAP DHCP Discover phase started
413 28 Laurent GUERBY
2012 Jul 17 16:10:51 switch %$ VDC-1 %$ %POAP-2-POAP_INFO:   - Abort Power On Auto Provisioning [yes - continue with normal setup, skip - bypass password and basic configuration, no - continue with Power On Auto Provisioning] (yes/skip/no)[no]: 
414 28 Laurent GUERBY
2012 Jul 17 16:10:51 switch %$ VDC-1 %$ %POAP-2-POAP_FAILURE: [FOC1636R174-6C:20:56:E6:D4:01] - POAP DHCP discover phase failed
415 28 Laurent GUERBY
2012 Jul 17 16:10:53 switch %$ VDC-1 %$ %POAP-2-POAP_INFO:   - Abort Power On Auto Provisioning [yes - continue with normal setup, skip - bypass password and basic configuration, no - continue with Power On Auto Provisioning] (yes/skip/no)[no]: 
416 28 Laurent GUERBY
2012 Jul 17 16:10:57 switch %$ VDC-1 %$ %POAP-2-POAP_INFO: [FOC1636R174-6C:20:56:E6:D4:01] - USB Initializing Success
417 28 Laurent GUERBY
2012 Jul 17 16:10:57 switch %$ VDC-1 %$ %POAP-2-POAP_INFO: [FOC1636R174-6C:20:56:E6:D4:01] - USB disk not detected
418 28 Laurent GUERBY
2012 Jul 17 16:10:57 switch %$ VDC-1 %$ last message repeated 1 time
419 28 Laurent GUERBY
2012 Jul 17 16:10:57 switch %$ VDC-1 %$ %POAP-2-POAP_DHCP_DISCOVER_START: [FOC1636R174-6C:20:56:E6:D4:01] - POAP DHCP Discover phase started
420 28 Laurent GUERBY
2012 Jul 17 16:10:57 switch %$ VDC-1 %$ %POAP-2-POAP_INFO:   - Abort Power On Auto Provisioning [yes - continue with normal setup, skip - bypass password and basic configuration, no - continue with Power On Auto Provisioning] (yes/skip/no)[no]: 
421 28 Laurent GUERBY
2012 Jul 17 16:10:57 switch %$ VDC-1 %$ %POAP-2-POAP_FAILURE: [FOC1636R174-6C:20:56:E6:D4:01] - POAP DHCP discover phase failed
422 28 Laurent GUERBY
2012 Jul 17 16:10:59 switch %$ VDC-1 %$ %POAP-2-POAP_INFO:   - Abort Power On Auto Provisioning [yes - continue with normal setup, skip - bypass password and basic configuration, no - continue with Power On Auto Provisioning] (yes/skip/no)[no]: 
423 28 Laurent GUERBY
2012 Jul 17 16:11:03 switch %$ VDC-1 %$ %POAP-2-POAP_INFO: [FOC1636R174-6C:20:56:E6:D4:01] - USB Initializing Success
424 28 Laurent GUERBY
2012 Jul 17 16:11:03 switch %$ VDC-1 %$ %POAP-2-POAP_INFO: [FOC1636R174-6C:20:56:E6:D4:01] - USB disk not detected
425 28 Laurent GUERBY
2012 Jul 17 16:11:03 switch %$ VDC-1 %$ last message repeated 1 time
426 28 Laurent GUERBY
2012 Jul 17 16:11:03 switch %$ VDC-1 %$ %POAP-2-POAP_DHCP_DISCOVER_START: [FOC1636R174-6C:20:56:E6:D4:01] - POAP DHCP Discover phase started
427 28 Laurent GUERBY
2012 Jul 17 16:11:03 switch %$ VDC-1 %$ %POAP-2-POAP_INFO:   - Abort Power On Auto Provisioning [yes - continue with normal setup, skip - bypass password and basic configuration, no - continue with Power On Auto Provisioning] (yes/skip/no)[no]: 
428 28 Laurent GUERBY
2012 Jul 17 16:11:03 switch %$ VDC-1 %$ %POAP-2-POAP_FAILURE: [FOC1636R174-6C:20:56:E6:D4:01] - POAP DHCP discover phase failed
429 28 Laurent GUERBY
skip
430 28 Laurent GUERBY
!!! NOTE: You have selected skip option. POAP will be aborted and password configuration will be skipped !!!
431 28 Laurent GUERBY
Disabling POAP.......2012 Jul 17 16:11:05 switch %$ VDC-1 %$ %POAP-2-POAP_INFO:   - Abort Power On Auto Provisioning [yes - continue with normal setup, skip - bypass password and basic configuration, no - continue with Power On Auto Provisioning] (yes/skip/no)[no]: 
432 28 Laurent GUERBY
Disabling POAP
433 28 Laurent GUERBY
2012 Jul 17 16:11:08 switch %$ VDC-1 %$ %POAP-2-POAP_INFO: [FOC1636R174-6C:20:56:E6:D4:01] - USB Initializing Success
434 28 Laurent GUERBY
2012 Jul 17 16:11:09 switch %$ VDC-1 %$ %POAP-2-POAP_INFO: [FOC1636R174-6C:20:56:E6:D4:01] - USB disk not detected
435 28 Laurent GUERBY
2012 Jul 17 16:11:09 switch %$ VDC-1 %$ last message repeated 1 time
436 28 Laurent GUERBY
2012 Jul 17 16:11:09 switch %$ VDC-1 %$ %POAP-2-POAP_DHCP_DISCOVER_START: [FOC1636R174-6C:20:56:E6:D4:01] - POAP DHCP Discover phase started
437 28 Laurent GUERBY
2012 Jul 17 16:11:09 switch %$ VDC-1 %$ %POAP-2-POAP_INFO:   - Abort Power On Auto Provisioning [yes - continue with normal setup, skip - bypass password and basic configuration, no - continue with Power On Auto Provisioning] (yes/skip/no)[no]: 
438 28 Laurent GUERBY
skip
439 28 Laurent GUERBY
Enabling feature lldp by default
440 28 Laurent GUERBY
Basic configuration has been skipped!
441 28 Laurent GUERBY
Applying default configuration
442 28 Laurent GUERBY
N3K:Applying Default CoPP configuration
443 28 Laurent GUERBY
444 28 Laurent GUERBY
445 28 Laurent GUERBY
446 28 Laurent GUERBY
User Access Verification
447 28 Laurent GUERBY
 login: admin
448 28 Laurent GUERBY
Password: 
449 28 Laurent GUERBY
450 28 Laurent GUERBY
Cisco Nexus Operating System (NX-OS) Software
451 28 Laurent GUERBY
TAC support: http://www.cisco.com/tac
452 28 Laurent GUERBY
Copyright (C) 2002-2017, Cisco and/or its affiliates.
453 28 Laurent GUERBY
All rights reserved.
454 28 Laurent GUERBY
The copyrights to certain works contained in this software are
455 28 Laurent GUERBY
owned by other third parties and used and distributed under their own
456 28 Laurent GUERBY
licenses, such as open source.  This software is provided "as is," and unless
457 28 Laurent GUERBY
otherwise stated, there is no warranty, express or implied, including but not
458 28 Laurent GUERBY
limited to warranties of merchantability and fitness for a particular purpose.
459 28 Laurent GUERBY
Certain components of this software are licensed under
460 28 Laurent GUERBY
the GNU General Public License (GPL) version 2.0 or 
461 28 Laurent GUERBY
GNU General Public License (GPL) version 3.0  or the GNU
462 28 Laurent GUERBY
Lesser General Public License (LGPL) Version 2.1 or 
463 28 Laurent GUERBY
Lesser General Public License (LGPL) Version 2.0. 
464 28 Laurent GUERBY
A copy of each such license is available at
465 28 Laurent GUERBY
http://www.opensource.org/licenses/gpl-2.0.php and
466 28 Laurent GUERBY
http://opensource.org/licenses/gpl-3.0.html and
467 28 Laurent GUERBY
http://www.opensource.org/licenses/lgpl-2.1.php and
468 28 Laurent GUERBY
http://www.gnu.org/licenses/old-licenses/library.txt.
469 28 Laurent GUERBY
switch# 
470 28 Laurent GUERBY
</pre>
471 23 Laurent GUERBY
472 29 Laurent GUERBY
<pre>
473 29 Laurent GUERBY
switch# show version
474 29 Laurent GUERBY
Cisco Nexus Operating System (NX-OS) Software
475 29 Laurent GUERBY
TAC support: http://www.cisco.com/tac
476 29 Laurent GUERBY
Copyright (C) 2002-2017, Cisco and/or its affiliates.
477 29 Laurent GUERBY
All rights reserved.
478 29 Laurent GUERBY
The copyrights to certain works contained in this software are
479 29 Laurent GUERBY
owned by other third parties and used and distributed under their own
480 29 Laurent GUERBY
licenses, such as open source.  This software is provided "as is," and unless
481 29 Laurent GUERBY
otherwise stated, there is no warranty, express or implied, including but not
482 29 Laurent GUERBY
limited to warranties of merchantability and fitness for a particular purpose.
483 29 Laurent GUERBY
Certain components of this software are licensed under
484 29 Laurent GUERBY
the GNU General Public License (GPL) version 2.0 or 
485 29 Laurent GUERBY
GNU General Public License (GPL) version 3.0  or the GNU
486 29 Laurent GUERBY
Lesser General Public License (LGPL) Version 2.1 or 
487 29 Laurent GUERBY
Lesser General Public License (LGPL) Version 2.0. 
488 29 Laurent GUERBY
A copy of each such license is available at
489 29 Laurent GUERBY
http://www.opensource.org/licenses/gpl-2.0.php and
490 29 Laurent GUERBY
http://opensource.org/licenses/gpl-3.0.html and
491 29 Laurent GUERBY
http://www.opensource.org/licenses/lgpl-2.1.php and
492 29 Laurent GUERBY
http://www.gnu.org/licenses/old-licenses/library.txt.
493 29 Laurent GUERBY
494 29 Laurent GUERBY
Software
495 29 Laurent GUERBY
  BIOS: version 4.5.0
496 29 Laurent GUERBY
  NXOS: version 7.0(3)I7(2)
497 29 Laurent GUERBY
  BIOS compile time:  11/09/2017
498 29 Laurent GUERBY
  NXOS image file is: bootflash:///nxos.7.0.3.I7.2.bin
499 29 Laurent GUERBY
  NXOS compile time:  11/22/2017 13:00:00 [11/22/2017 21:55:29]
500 29 Laurent GUERBY
501 29 Laurent GUERBY
502 29 Laurent GUERBY
Hardware
503 29 Laurent GUERBY
  cisco Nexus3000 C3064PQ Chassis 
504 29 Laurent GUERBY
  Intel(R) Celeron(R) CPU        P4505  @ 1.87GHz with 3902872 kB of memory.
505 29 Laurent GUERBY
  Processor Board ID FOC16382AE1
506 29 Laurent GUERBY
507 29 Laurent GUERBY
  Device name: switch
508 29 Laurent GUERBY
  bootflash:    1635720 kB
509 29 Laurent GUERBY
  usb1:               0 kB (expansion flash)
510 29 Laurent GUERBY
511 29 Laurent GUERBY
Kernel uptime is 0 day(s), 0 hour(s), 7 minute(s), 5 second(s)
512 29 Laurent GUERBY
513 29 Laurent GUERBY
Last reset 
514 29 Laurent GUERBY
  Reason: Unknown
515 29 Laurent GUERBY
  System version: 7.0(3)I7(2)
516 29 Laurent GUERBY
  Service: 
517 29 Laurent GUERBY
518 29 Laurent GUERBY
plugin
519 29 Laurent GUERBY
  Core Plugin, Ethernet Plugin
520 29 Laurent GUERBY
521 29 Laurent GUERBY
Active Package(s):
522 29 Laurent GUERBY
523 29 Laurent GUERBY
switch# 
524 29 Laurent GUERBY
525 29 Laurent GUERBY
</pre>
526 29 Laurent GUERBY
527 7 Laurent GUERBY
h2. Consommation
528 6 Laurent GUERBY
529 6 Laurent GUERBY
77 Watt, cos phi 0.92, pas de pic pendant le boot