Projet

Général

Profil

NXOS » Historique » Version 35

Laurent GUERBY, 07/10/2018 15:23

1 20 Laurent GUERBY
{{>toc}}
2 20 Laurent GUERBY
3 1 Matthieu Herrb
h1. NXOS
4 1 Matthieu Herrb
5 11 Laurent GUERBY
Cisco Nexus 3064X
6 30 Laurent GUERBY
version @7.0(3)I4(7)@
7 1 Matthieu Herrb
8 10 Laurent GUERBY
Voir aussi https://www.grenode.net/Documentation_technique/Machines/kraken/
9 10 Laurent GUERBY
10 21 Laurent GUERBY
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus3000/sw/fundamentals/503_U3_1/b_Nexus_3000_Fundamentals_Guide_Release_503_U3_1.pdf
11 18 Laurent GUERBY
12 31 Laurent GUERBY
h2. Password
13 31 Laurent GUERBY
14 31 Laurent GUERBY
<pre>
15 31 Laurent GUERBY
conf t
16 31 Laurent GUERBY
username admin password LEPASSWORD
17 31 Laurent GUERBY
exit
18 31 Laurent GUERBY
copy run start
19 31 Laurent GUERBY
</pre>
20 31 Laurent GUERBY
21 1 Matthieu Herrb
h2. Interface de management out-of-band
22 1 Matthieu Herrb
23 9 Laurent GUERBY
* n3064a Adresse: 192.168.129.46
24 31 Laurent GUERBY
* n3064b Adresse: 192.168.129.45
25 31 Laurent GUERBY
* n3064c Adresse: 192.168.129.44
26 9 Laurent GUERBY
27 9 Laurent GUERBY
<pre>
28 9 Laurent GUERBY
interface mgmt0
29 9 Laurent GUERBY
  vrf member management
30 9 Laurent GUERBY
  ip address 192.168.129.46/24
31 9 Laurent GUERBY
32 9 Laurent GUERBY
</pre>
33 1 Matthieu Herrb
34 1 Matthieu Herrb
h2. Commandes
35 1 Matthieu Herrb
36 1 Matthieu Herrb
h3. Sauvegarde config 
37 1 Matthieu Herrb
38 1 Matthieu Herrb
<pre>
39 1 Matthieu Herrb
nexus# copy run start
40 1 Matthieu Herrb
</pre>
41 1 Matthieu Herrb
42 1 Matthieu Herrb
Copie via scp
43 1 Matthieu Herrb
44 1 Matthieu Herrb
<pre>
45 1 Matthieu Herrb
nexus# copy run scp://matthieu@192.168.129.1/
46 1 Matthieu Herrb
</pre>
47 1 Matthieu Herrb
48 25 Laurent GUERBY
h3. Passwordless ssh
49 25 Laurent GUERBY
50 25 Laurent GUERBY
<pre>
51 27 Laurent GUERBY
n3064a# show user-account 
52 27 Laurent GUERBY
user:admin
53 27 Laurent GUERBY
        this user account has no expiry date
54 27 Laurent GUERBY
        roles:network-admin 
55 25 Laurent GUERBY
conf t
56 25 Laurent GUERBY
username admin sshkey ssh-rsa AAAA...
57 26 Laurent GUERBY
</pre>
58 25 Laurent GUERBY
59 25 Laurent GUERBY
Ensuite :
60 25 Laurent GUERBY
61 25 Laurent GUERBY
<pre>
62 25 Laurent GUERBY
(echo conf t;echo int e1/42;echo switchport access vlan 3189) |ssh n3064a
63 25 Laurent GUERBY
</pre>
64 25 Laurent GUERBY
65 1 Matthieu Herrb
h3. Config interface
66 1 Matthieu Herrb
67 1 Matthieu Herrb
<pre>
68 1 Matthieu Herrb
nexus# conf t
69 1 Matthieu Herrb
nexus(config)# interface ethernet 1/3
70 1 Matthieu Herrb
nexus(config-if)# switchport mode trunk
71 1 Matthieu Herrb
nexus(config-if)# exit
72 1 Matthieu Herrb
nexus(config)# exit
73 1 Matthieu Herrb
nexus#
74 1 Matthieu Herrb
</pre>
75 1 Matthieu Herrb
76 1 Matthieu Herrb
pour un vlan non taggé
77 1 Matthieu Herrb
<pre>
78 1 Matthieu Herrb
nexus(config-if)# switchport access vlan 3131
79 1 Matthieu Herrb
</pre>
80 1 Matthieu Herrb
81 2 Matthieu Herrb
h3. Etat des interfaces
82 3 Matthieu Herrb
83 1 Matthieu Herrb
<pre>
84 1 Matthieu Herrb
nexus# sh int status
85 1 Matthieu Herrb
nexus# sh int transceiver
86 1 Matthieu Herrb
nexus# sh int ethernet 1/1
87 16 Sebastien Badia
# Afficher le DOM d'une optique
88 16 Sebastien Badia
nexus# sh int Eth 1/1 tran de
89 1 Matthieu Herrb
</pre>
90 1 Matthieu Herrb
</pre>
91 2 Matthieu Herrb
92 1 Matthieu Herrb
h3. Boot
93 1 Matthieu Herrb
94 32 Laurent GUERBY
Si ça tombe dans le loader :
95 32 Laurent GUERBY
96 32 Laurent GUERBY
<pre>
97 32 Laurent GUERBY
loader> dir
98 32 Laurent GUERBY
bootflash:
99 32 Laurent GUERBY
  sprom_3_0_0 
100 32 Laurent GUERBY
  nxos.7.0.3.I7.2.bin 
101 32 Laurent GUERBY
  mts.log 
102 32 Laurent GUERBY
  sprom_cstruct_2_0_0 
103 32 Laurent GUERBY
  vdc_2 
104 32 Laurent GUERBY
  vdc_3 
105 32 Laurent GUERBY
  vdc_4 
106 32 Laurent GUERBY
  virt_strg_pool_bf 
107 32 Laurent GUERBY
  logflash 
108 32 Laurent GUERBY
  license_FOC1636R174_23.lic 
109 32 Laurent GUERBY
  virtual-instance 
110 32 Laurent GUERBY
  sprom_cstruct_3_0_0 
111 32 Laurent GUERBY
  20120525_150205_poap_3968_init.log 
112 32 Laurent GUERBY
  sprom_2_0_1 
113 32 Laurent GUERBY
  n3000-uk9-kickstart.6.0.2.U6.2a.bin 
114 32 Laurent GUERBY
  platform-sdk.cmd 
115 32 Laurent GUERBY
  scripts 
116 32 Laurent GUERBY
  n3000-uk9.6.0.2.U6.2a.bin 
117 32 Laurent GUERBY
  20120717_161025_poap_13595_init.log 
118 32 Laurent GUERBY
loader> boot bootflash:nxos.7.0.3.I7.2.bin
119 32 Laurent GUERBY
</pre>
120 32 Laurent GUERBY
121 33 Laurent GUERBY
Pour rendre permanent choisir la version donnée par dir "nxos...XXX.bin" puis :
122 32 Laurent GUERBY
123 1 Matthieu Herrb
<pre>
124 1 Matthieu Herrb
nexus# conf t
125 33 Laurent GUERBY
nexus(config)# boot nxos bootflash:/nxos.7.0.3.XXX.bin 
126 1 Matthieu Herrb
nexus(config)# boot order bootflash
127 1 Matthieu Herrb
nexus(config)# exit
128 1 Matthieu Herrb
nexus#
129 4 Matthieu Herrb
</pre>
130 4 Matthieu Herrb
131 15 Sebastien Badia
h3. Features et Misc
132 8 Laurent GUERBY
133 1 Matthieu Herrb
<pre>
134 15 Sebastien Badia
# Pour dire au switch d'accepter n'importe quel type de SFP
135 1 Matthieu Herrb
service unsupported-transceiver
136 15 Sebastien Badia
# Autoriser le switch à avoir une IP sur une interface VLAN
137 15 Sebastien Badia
feature interface-vlan
138 35 Laurent GUERBY
# desactiver STP (actif par défaut)
139 35 Laurent GUERBY
no spanning-tree vlan 1-3967,4048-4093
140 15 Sebastien Badia
# Activer les features LACP
141 15 Sebastien Badia
feature lacp
142 15 Sebastien Badia
# Activer la possiblité de faire du LLDP
143 15 Sebastien Badia
feature lldp
144 15 Sebastien Badia
# Mettre tous les ports en shutdown par défaut (penser à activer le port lors de la configuration avec un 'no shutdown'
145 15 Sebastien Badia
system default switchport shutdown
146 15 Sebastien Badia
</pre>
147 15 Sebastien Badia
148 15 Sebastien Badia
h3. Misc
149 15 Sebastien Badia
150 15 Sebastien Badia
<pre>
151 8 Laurent GUERBY
no password strength-check
152 8 Laurent GUERBY
153 13 Laurent GUERBY
nexus# sh mac address-table 
154 13 Laurent GUERBY
155 13 Laurent GUERBY
nexus# sh environment
156 13 Laurent GUERBY
(...) 
157 13 Laurent GUERBY
Temperature:
158 13 Laurent GUERBY
-------------------------------------------------------------------------
159 13 Laurent GUERBY
Module  Sensor             MajorThresh   MinorThres   CurTemp     Status 
160 13 Laurent GUERBY
                           (Celsius)     (Celsius)   (Celsius)           
161 13 Laurent GUERBY
-------------------------------------------------------------------------
162 13 Laurent GUERBY
1        Back-Right (D0)   70            44            33         Ok             
163 13 Laurent GUERBY
1        Back-Left  (D1)   70            42            29         Ok             
164 13 Laurent GUERBY
1        Front-Right(D2)   70            47            32         Ok             
165 13 Laurent GUERBY
1        Front-Left (D3)   70            49            30         Ok         
166 13 Laurent GUERBY
167 14 Laurent GUERBY
nexus# sh int e1/1 cap
168 14 Laurent GUERBY
nexus# sh int e1/1 tra det
169 14 Laurent GUERBY
170 1 Matthieu Herrb
171 1 Matthieu Herrb
# TODO verifier
172 1 Matthieu Herrb
conf t
173 1 Matthieu Herrb
int eth1/4
174 1 Matthieu Herrb
switchport trunk allowed vlan xxx
175 1 Matthieu Herrb
switchport trunk native vlan nnn
176 1 Matthieu Herrb
</pre>
177 19 Laurent GUERBY
178 22 Laurent GUERBY
h3. NTP
179 22 Laurent GUERBY
180 22 Laurent GUERBY
Client de nagios :
181 22 Laurent GUERBY
182 22 Laurent GUERBY
<pre>
183 22 Laurent GUERBY
conf t
184 22 Laurent GUERBY
ntp server 192.168.3.7
185 22 Laurent GUERBY
ntp source-interface  Vlan3175
186 22 Laurent GUERBY
</pre>
187 22 Laurent GUERBY
188 19 Laurent GUERBY
h3. 40G
189 19 Laurent GUERBY
190 19 Laurent GUERBY
40G <=> 4x10G reboot necessaire
191 19 Laurent GUERBY
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus3000/sw/interfaces/6_x/b_Cisco_n3k_Interfaces_Configuration_Guide_602_U11/b_Cisco_n3k_Interfaces_Configuration_Guide_602_U11_chapter_010.html
192 19 Laurent GUERBY
193 19 Laurent GUERBY
<pre>
194 19 Laurent GUERBY
conf t
195 19 Laurent GUERBY
hardware profile portmode 48x10g+4x40g
196 19 Laurent GUERBY
exit
197 19 Laurent GUERBY
reload
198 19 Laurent GUERBY
</pre>
199 19 Laurent GUERBY
200 34 Laurent GUERBY
4x4x10G :
201 19 Laurent GUERBY
202 19 Laurent GUERBY
<pre>
203 1 Matthieu Herrb
hardware profile portmode 64x10G
204 34 Laurent GUERBY
</pre>
205 34 Laurent GUERBY
206 34 Laurent GUERBY
4x10G (port 49) + 3x40G (port 50-52)
207 34 Laurent GUERBY
<pre>
208 34 Laurent GUERBY
hardware profile portmode 52x10G+3x40G
209 19 Laurent GUERBY
</pre>
210 19 Laurent GUERBY
211 24 Laurent GUERBY
h3. MPLS
212 8 Laurent GUERBY
213 24 Laurent GUERBY
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus3000/sw/label_switching/7x/b_Cisco_Nexus_3000_Series_NX-OS_Label_Switching_Configuration_Guide_7x/b_Cisco_Nexus_3000_Series_NX-OS_Label_Switching_Configuration_Guide_7x_chapter_010.html
214 24 Laurent GUERBY
<pre>
215 24 Laurent GUERBY
n3064a# show feature-set 
216 24 Laurent GUERBY
Feature Set Name      ID        State   
217 24 Laurent GUERBY
--------------------  --------  --------
218 24 Laurent GUERBY
fex                    3          uninstalled
219 24 Laurent GUERBY
mpls                   4          uninstalled
220 24 Laurent GUERBY
fabric                 7          uninstalled
221 24 Laurent GUERBY
fcoe-npv               8          uninstalled
222 24 Laurent GUERBY
</pre>
223 24 Laurent GUERBY
224 24 Laurent GUERBY
Linux
225 24 Laurent GUERBY
<pre>
226 24 Laurent GUERBY
20180312 09:09:57<guerby> test du lundi matin sur kernel 4.16-rc4 avec iproute2 4.15.0:  ip route add 10.1.1.0/30 encap mpls 200/300 dev eth0 et tcpdump donne
227 24 Laurent GUERBY
20180312 09:09:59<guerby> 09:07:56.394863 70:85:c2:3a:17:2a > ff:ff:ff:ff:ff:ff, ethertype MPLS unicast (0x8847), length 106: MPLS (label 200, exp 0, ttl 64) (label 300, exp 0, [S], ttl 64) 91.224.148.12 > 10.1.1.1: ICMP echo request, id 25171, seq 37, length 64
228 24 Laurent GUERBY
</pre>
229 24 Laurent GUERBY
230 4 Matthieu Herrb
h2. Infos
231 4 Matthieu Herrb
232 4 Matthieu Herrb
<pre>
233 4 Matthieu Herrb
nexus# sh version
234 4 Matthieu Herrb
Cisco Nexus Operating System (NX-OS) Software
235 4 Matthieu Herrb
TAC support: http://www.cisco.com/tac
236 4 Matthieu Herrb
Copyright (C) 2002-2017, Cisco and/or its affiliates.
237 4 Matthieu Herrb
All rights reserved.
238 4 Matthieu Herrb
The copyrights to certain works contained in this software are
239 4 Matthieu Herrb
owned by other third parties and used and distributed under their own
240 4 Matthieu Herrb
licenses, such as open source.  This software is provided "as is," and unless
241 4 Matthieu Herrb
otherwise stated, there is no warranty, express or implied, including but not
242 4 Matthieu Herrb
limited to warranties of merchantability and fitness for a particular purpose.
243 4 Matthieu Herrb
Certain components of this software are licensed under
244 4 Matthieu Herrb
the GNU General Public License (GPL) version 2.0 or 
245 4 Matthieu Herrb
GNU General Public License (GPL) version 3.0  or the GNU
246 4 Matthieu Herrb
Lesser General Public License (LGPL) Version 2.1 or 
247 4 Matthieu Herrb
Lesser General Public License (LGPL) Version 2.0. 
248 4 Matthieu Herrb
A copy of each such license is available at
249 4 Matthieu Herrb
http://www.opensource.org/licenses/gpl-2.0.php and
250 4 Matthieu Herrb
http://opensource.org/licenses/gpl-3.0.html and
251 4 Matthieu Herrb
http://www.opensource.org/licenses/lgpl-2.1.php and
252 4 Matthieu Herrb
http://www.gnu.org/licenses/old-licenses/library.txt.
253 4 Matthieu Herrb
254 4 Matthieu Herrb
Software
255 4 Matthieu Herrb
  BIOS: version 4.0.0
256 4 Matthieu Herrb
  NXOS: version 7.0(3)I4(7)
257 4 Matthieu Herrb
  BIOS compile time:  12/05/2016
258 4 Matthieu Herrb
  NXOS image file is: bootflash:///nxos.7.0.3.I4.7.bin
259 4 Matthieu Herrb
  NXOS compile time:  6/28/2017 14:00:00 [06/28/2017 21:53:29]
260 4 Matthieu Herrb
261 4 Matthieu Herrb
262 4 Matthieu Herrb
Hardware
263 4 Matthieu Herrb
  cisco Nexus3000 C3064PQ Chassis 
264 4 Matthieu Herrb
  Intel(R) Celeron(R) CPU        P4505  @ 1.87GHz with 3903284 kB of memory.
265 4 Matthieu Herrb
  Processor Board ID FOC17342TSZ
266 4 Matthieu Herrb
267 4 Matthieu Herrb
  Device name: nexus
268 4 Matthieu Herrb
  bootflash:    1638000 kB
269 4 Matthieu Herrb
  usb1:               0 kB (expansion flash)
270 4 Matthieu Herrb
271 4 Matthieu Herrb
Kernel uptime is 0 day(s), 2 hour(s), 10 minute(s), 12 second(s)
272 4 Matthieu Herrb
273 4 Matthieu Herrb
Last reset at 335975 usecs after  Wed Feb 14 15:25:27 2018
274 4 Matthieu Herrb
275 4 Matthieu Herrb
  Reason: Reset Requested by CLI command reload
276 4 Matthieu Herrb
  System version: 7.0(3)I4(7)
277 4 Matthieu Herrb
  Service: 
278 4 Matthieu Herrb
279 4 Matthieu Herrb
plugin
280 4 Matthieu Herrb
  Core Plugin, Ethernet Plugin
281 4 Matthieu Herrb
282 4 Matthieu Herrb
Active Package(s):
283 5 Matthieu Herrb
284 12 Laurent GUERBY
nexus# sh inventory all
285 5 Matthieu Herrb
NAME: "Chassis",  DESCR: "Nexus3000 C3064PQ Chassis"             
286 5 Matthieu Herrb
PID: N3K-C3064PQ-10GX    ,  VID: V01 ,  SN: FOC1734R15F          
287 5 Matthieu Herrb
288 5 Matthieu Herrb
NAME: "Slot 1",  DESCR: "48x10GE + 4x40G Supervisor"            
289 5 Matthieu Herrb
PID: N3K-C3064PQ-10GX    ,  VID: V01 ,  SN: FOC17342TSZ          
290 5 Matthieu Herrb
291 5 Matthieu Herrb
NAME: "Power Supply 1",  DESCR: "Nexus3000 C3064PQ Chassis Power Supply"
292 5 Matthieu Herrb
PID: N2200-PAC-400W      ,  VID: V04 ,  SN: DTN1733P0VH          
293 5 Matthieu Herrb
294 5 Matthieu Herrb
NAME: "Power Supply 2",  DESCR: "Nexus3000 C3064PQ Chassis Power Supply"
295 5 Matthieu Herrb
PID: N2200-PAC-400W      ,  VID: V04 ,  SN: DTN1733P0UK          
296 5 Matthieu Herrb
297 5 Matthieu Herrb
NAME: "Fan 1",  DESCR: "Nexus3000 C3064PQ Chassis Fan Module"  
298 1 Matthieu Herrb
PID: N3K-C3064-FAN-F     ,  VID: V00 ,  SN: N/A                  
299 12 Laurent GUERBY
300 12 Laurent GUERBY
NAME: Ethernet1/1,  DESCR: FiberStore                              
301 12 Laurent GUERBY
PID: SFP-H10GB-ACU10M    ,  VID: SFP-10G-AOC     ,  SN: F176CO35764-1    
302 23 Laurent GUERBY
303 23 Laurent GUERBY
nexus# sh license 
304 23 Laurent GUERBY
license_FOC1734R15F_12_1.lic:
305 23 Laurent GUERBY
SERVER this_host ANY
306 23 Laurent GUERBY
VENDOR cisco
307 23 Laurent GUERBY
FEATURE LAN_BASE_SERVICES_PKG cisco 1.0 permanent uncounted \
308 23 Laurent GUERBY
        VENDOR_STRING=<LIC_SOURCE>NEXUS_PRODUCTION</LIC_SOURCE><SKU>N3K-BAS1K9</SKU> \
309 23 Laurent GUERBY
        HOSTID=VDH=FOC1734R15F \
310 23 Laurent GUERBY
        NOTICE=<LicFileID>20131030222602000</LicFileID><LicLineID>1</LicLineID><PAK>N3K-C3064PQ-10GXFOC1734R15F</PAK> \
311 23 Laurent GUERBY
        SIGN=BBF8EBE2F7B6
312 23 Laurent GUERBY
FEATURE LAN_ENTERPRISE_SERVICES_PKG cisco 1.0 permanent uncounted \
313 23 Laurent GUERBY
        VENDOR_STRING=<LIC_SOURCE>NEXUS_PRODUCTION</LIC_SOURCE><SKU>N3K-LAN1K9</SKU> \
314 23 Laurent GUERBY
        HOSTID=VDH=FOC1734R15F \
315 23 Laurent GUERBY
        NOTICE=<LicFileID>20131030222602000</LicFileID><LicLineID>2</LicLineID><PAK>N3K-C3064PQ-10GXFOC1734R15F</PAK> \
316 23 Laurent GUERBY
        SIGN=FF75EB18A86E
317 23 Laurent GUERBY
318 23 Laurent GUERBY
</pre>
319 23 Laurent GUERBY
320 28 Laurent GUERBY
h2. Boot log
321 28 Laurent GUERBY
322 28 Laurent GUERBY
screen /dev/ttyUSB0 9600 8n1
323 28 Laurent GUERBY
324 28 Laurent GUERBY
A la question entrer "skip" puis login "admin" password vide.
325 28 Laurent GUERBY
326 28 Laurent GUERBY
<pre>
327 28 Laurent GUERBY
Press  ctrl L to go to loader prompt in 2 secs
328 28 Laurent GUERBY
329 28 Laurent GUERBY
Booting kickstart image: bootflash:/nxos.7.0.3.I7.2.bin
330 28 Laurent GUERBY
CardIndex = 11060
331 28 Laurent GUERBY
 Image valid
332 28 Laurent GUERBY
graphics_set_kernel_params enter: 
333 28 Laurent GUERBY
Installing klm_card_index
334 28 Laurent GUERBY
done
335 28 Laurent GUERBY
INIT: version 2.88 booting
336 28 Laurent GUERBY
Skipping ata_piix install for n3k.
337 28 Laurent GUERBY
Unsquashing rootfs ...
338 28 Laurent GUERBY
Removing libcrdcfgdata and linking libcrdcfgdata3nk
339 28 Laurent GUERBY
Installing isan procfs ... done.
340 28 Laurent GUERBY
Installing SSE module with card index 11060 ... done.
341 28 Laurent GUERBY
Creating SSE device node 246 ... done.
342 28 Laurent GUERBY
Loading I2C driver ... done.
343 28 Laurent GUERBY
Installing CCTRL driver for card_type 30 without NEED_GEM ... done.
344 28 Laurent GUERBY
10.20: Interrupt throttling disabled. No cctrl irq detected.
345 28 Laurent GUERBY
Loading IGB driver ... done.
346 28 Laurent GUERBY
347 28 Laurent GUERBY
Checking all filesystems.Current boot disk sda3..
348 28 Laurent GUERBY
349 28 Laurent GUERBY
Installing SPROM driver ... IS_N3K done.
350 28 Laurent GUERBY
Skipping installing default sprom values for N3k...
351 28 Laurent GUERBY
Installing pfmsvcs module with SPROM card index 11060 ... done.
352 28 Laurent GUERBY
Installing nvram module ... done.
353 28 Laurent GUERBY
Installing if_index module with port mode 1 ... done.
354 28 Laurent GUERBY
Installing fcfwd stub
355 28 Laurent GUERBY
Installing RNI lcnd ... done
356 28 Laurent GUERBY
Installing LC netdev ... done
357 28 Laurent GUERBY
Installing psdev module ... done.
358 28 Laurent GUERBY
Installing veobc module ... done.
359 28 Laurent GUERBY
Inserting OBFL module ... done.
360 28 Laurent GUERBY
Making OBFL character devices
361 28 Laurent GUERBY
Mounting OBFL pstore for mtd
362 28 Laurent GUERBY
Starting OpenBSD Secure Shell server: sshd ... done.
363 28 Laurent GUERBY
Trim files after extracting TOR files ...
364 28 Laurent GUERBY
tune2fs 1.42.1 (17-Feb-2012)
365 28 Laurent GUERBY
Setting reserved blocks percentage to 0% (0 blocks)
366 28 Laurent GUERBY
Starting portmap daemon...
367 28 Laurent GUERBY
creating NFS state directory: done
368 28 Laurent GUERBY
starting 8 nfsd kernel threads: done
369 28 Laurent GUERBY
starting mountd: done
370 28 Laurent GUERBY
starting statd: done
371 28 Laurent GUERBY
Saving image for img-sync ...
372 28 Laurent GUERBY
Loading system software
373 28 Laurent GUERBY
Installing local RPMS
374 28 Laurent GUERBY
Patch Repository Setup completed successfully
375 28 Laurent GUERBY
Creating /dev/mcelog
376 28 Laurent GUERBY
Starting mcelog daemon
377 28 Laurent GUERBY
Removing dme lib
378 28 Laurent GUERBY
Moving N3K specific syslog config file
379 28 Laurent GUERBY
INIT: Entering runlevel: 3
380 28 Laurent GUERBY
Running S93thirdparty-script...
381 28 Laurent GUERBY
382 28 Laurent GUERBY
Populating conf files for hybrid sysmgr ...
383 28 Laurent GUERBY
Removing bios-imgs and /lcimages
384 28 Laurent GUERBY
Starting hybrid sysmgr ...
385 28 Laurent GUERBY
inserting /isan/lib/modules/klm_cisco_nb.o ... done
386 28 Laurent GUERBY
Executing Prune clis.
387 28 Laurent GUERBY
2012 Jul 17 16:09:10  %$ VDC-1 %$ %USER-0-SYSTEM_MSG:  pfm_init; line 1496   - pfm
388 28 Laurent GUERBY
2012 Jul 17 16:09:11  %$ VDC-1 %$ %PLATFORM-2-PS_FAIL: Power supply 1 failed or shut down (Serial number DTN1710P431)
389 28 Laurent GUERBY
2012 Jul 17 16:09:11  %$ VDC-1 %$ %PLATFORM-2-PS_OK: Power supply 2 ok (Serial number DTN1801P09K)
390 28 Laurent GUERBY
2012 Jul 17 16:09:11  %$ VDC-1 %$ %PLATFORM-2-PS_FANOK: Fan in Power supply 2 ok
391 28 Laurent GUERBY
2012 Jul 17 16:09:11  %$ VDC-1 %$ %PLATFORM-2-PS_ABSENT: Power supply 1 is absent/shutdown, ps-redundancy might be affected
392 28 Laurent GUERBY
2012 Jul 17 16:09:11  %$ VDC-1 %$ %PLATFORM-2-PS_RED_MODE_CHG: Power supply operational redundancy mode changed to non-redundant
393 28 Laurent GUERBY
2012 Jul 17 16:09:11  %$ VDC-1 %$ %PLATFORM-2-FANMOD_FAN_OK: Fan module 1 (Fan1(sys_fan1) fan) ok
394 28 Laurent GUERBY
2012 Jul 17 16:09:11  %$ VDC-1 %$ %USER-0-SYSTEM_MSG:  before access to bkout_cfg  - clis
395 28 Laurent GUERBY
2012 Jul 17 16:09:17  %$ VDC-1 %$ netstack: Registration with cli server complete
396 28 Laurent GUERBY
2012 Jul 17 16:09:32  %$ VDC-1 %$ %USER-2-SYSTEM_MSG: ssnmgr_app_init called on ssnmgr up - aclmgr
397 28 Laurent GUERBY
2012 Jul 17 16:09:41  %$ VDC-1 %$ %USER-0-SYSTEM_MSG: end of default policer - copp
398 28 Laurent GUERBY
2012 Jul 17 16:09:52  %$ VDC-1 %$ %VDC_MGR-2-VDC_ONLINE: vdc 1 has come online 
399 28 Laurent GUERBY
Waiting for system online status before starting POAP ...
400 28 Laurent GUERBY
Starting Power On Auto Provisioning...2012 Jul 17 16:10:21 switch %$ VDC-1 %$ %ASCII-CFG-2-CONF_CONTROL: System ready
401 28 Laurent GUERBY
Done
402 28 Laurent GUERBY
403 28 Laurent GUERBY
Abort Power On Auto Provisioning [yes - continue with normal setup, skip - bypass password and basic configuration, no - continue with Power On Auto Provisioning] (yes/skip/no)[no]: 2012 Jul 17 16:10:25 switch %$ VDC-1 %$ %POAP-2-POAP_INITED: [FOC1636R174-6C:20:56:E6:D4:01] - POAP process initialized                                                                                                                                                                                                                                                   
404 28 Laurent GUERBY
2012 Jul 17 16:10:46 switch %$ VDC-1 %$ %POAP-2-POAP_INFO: [FOC1636R174-6C:20:56:E6:D4:01] - USB Initializing Success
405 28 Laurent GUERBY
2012 Jul 17 16:10:46 switch %$ VDC-1 %$ %POAP-2-POAP_INFO: [FOC1636R174-6C:20:56:E6:D4:01] - USB disk not detected
406 28 Laurent GUERBY
2012 Jul 17 16:10:46 switch %$ VDC-1 %$ last message repeated 1 time
407 28 Laurent GUERBY
2012 Jul 17 16:10:46 switch %$ VDC-1 %$ %POAP-2-POAP_DHCP_DISCOVER_START: [FOC1636R174-6C:20:56:E6:D4:01] - POAP DHCP Discover phase started
408 28 Laurent GUERBY
2012 Jul 17 16:10:46 switch %$ VDC-1 %$ %POAP-2-POAP_INFO:   - Abort Power On Auto Provisioning [yes - continue with normal setup, skip - bypass password and basic configuration, no - continue with Power On Auto Provisioning] (yes/skip/no)[no]: 
409 28 Laurent GUERBY
2012 Jul 17 16:10:46 switch %$ VDC-1 %$ %POAP-2-POAP_FAILURE: [FOC1636R174-6C:20:56:E6:D4:01] - POAP DHCP discover phase failed
410 28 Laurent GUERBY
2012 Jul 17 16:10:48 switch %$ VDC-1 %$ %POAP-2-POAP_INFO:   - Abort Power On Auto Provisioning [yes - continue with normal setup, skip - bypass password and basic configuration, no - continue with Power On Auto Provisioning] (yes/skip/no)[no]: 
411 28 Laurent GUERBY
2012 Jul 17 16:10:51 switch %$ VDC-1 %$ %POAP-2-POAP_INFO: [FOC1636R174-6C:20:56:E6:D4:01] - USB Initializing Success
412 28 Laurent GUERBY
2012 Jul 17 16:10:51 switch %$ VDC-1 %$ %POAP-2-POAP_INFO: [FOC1636R174-6C:20:56:E6:D4:01] - USB disk not detected
413 28 Laurent GUERBY
2012 Jul 17 16:10:51 switch %$ VDC-1 %$ last message repeated 1 time
414 28 Laurent GUERBY
2012 Jul 17 16:10:51 switch %$ VDC-1 %$ %POAP-2-POAP_DHCP_DISCOVER_START: [FOC1636R174-6C:20:56:E6:D4:01] - POAP DHCP Discover phase started
415 28 Laurent GUERBY
2012 Jul 17 16:10:51 switch %$ VDC-1 %$ %POAP-2-POAP_INFO:   - Abort Power On Auto Provisioning [yes - continue with normal setup, skip - bypass password and basic configuration, no - continue with Power On Auto Provisioning] (yes/skip/no)[no]: 
416 28 Laurent GUERBY
2012 Jul 17 16:10:51 switch %$ VDC-1 %$ %POAP-2-POAP_FAILURE: [FOC1636R174-6C:20:56:E6:D4:01] - POAP DHCP discover phase failed
417 28 Laurent GUERBY
2012 Jul 17 16:10:53 switch %$ VDC-1 %$ %POAP-2-POAP_INFO:   - Abort Power On Auto Provisioning [yes - continue with normal setup, skip - bypass password and basic configuration, no - continue with Power On Auto Provisioning] (yes/skip/no)[no]: 
418 28 Laurent GUERBY
2012 Jul 17 16:10:57 switch %$ VDC-1 %$ %POAP-2-POAP_INFO: [FOC1636R174-6C:20:56:E6:D4:01] - USB Initializing Success
419 28 Laurent GUERBY
2012 Jul 17 16:10:57 switch %$ VDC-1 %$ %POAP-2-POAP_INFO: [FOC1636R174-6C:20:56:E6:D4:01] - USB disk not detected
420 28 Laurent GUERBY
2012 Jul 17 16:10:57 switch %$ VDC-1 %$ last message repeated 1 time
421 28 Laurent GUERBY
2012 Jul 17 16:10:57 switch %$ VDC-1 %$ %POAP-2-POAP_DHCP_DISCOVER_START: [FOC1636R174-6C:20:56:E6:D4:01] - POAP DHCP Discover phase started
422 28 Laurent GUERBY
2012 Jul 17 16:10:57 switch %$ VDC-1 %$ %POAP-2-POAP_INFO:   - Abort Power On Auto Provisioning [yes - continue with normal setup, skip - bypass password and basic configuration, no - continue with Power On Auto Provisioning] (yes/skip/no)[no]: 
423 28 Laurent GUERBY
2012 Jul 17 16:10:57 switch %$ VDC-1 %$ %POAP-2-POAP_FAILURE: [FOC1636R174-6C:20:56:E6:D4:01] - POAP DHCP discover phase failed
424 28 Laurent GUERBY
2012 Jul 17 16:10:59 switch %$ VDC-1 %$ %POAP-2-POAP_INFO:   - Abort Power On Auto Provisioning [yes - continue with normal setup, skip - bypass password and basic configuration, no - continue with Power On Auto Provisioning] (yes/skip/no)[no]: 
425 28 Laurent GUERBY
2012 Jul 17 16:11:03 switch %$ VDC-1 %$ %POAP-2-POAP_INFO: [FOC1636R174-6C:20:56:E6:D4:01] - USB Initializing Success
426 28 Laurent GUERBY
2012 Jul 17 16:11:03 switch %$ VDC-1 %$ %POAP-2-POAP_INFO: [FOC1636R174-6C:20:56:E6:D4:01] - USB disk not detected
427 28 Laurent GUERBY
2012 Jul 17 16:11:03 switch %$ VDC-1 %$ last message repeated 1 time
428 28 Laurent GUERBY
2012 Jul 17 16:11:03 switch %$ VDC-1 %$ %POAP-2-POAP_DHCP_DISCOVER_START: [FOC1636R174-6C:20:56:E6:D4:01] - POAP DHCP Discover phase started
429 28 Laurent GUERBY
2012 Jul 17 16:11:03 switch %$ VDC-1 %$ %POAP-2-POAP_INFO:   - Abort Power On Auto Provisioning [yes - continue with normal setup, skip - bypass password and basic configuration, no - continue with Power On Auto Provisioning] (yes/skip/no)[no]: 
430 28 Laurent GUERBY
2012 Jul 17 16:11:03 switch %$ VDC-1 %$ %POAP-2-POAP_FAILURE: [FOC1636R174-6C:20:56:E6:D4:01] - POAP DHCP discover phase failed
431 28 Laurent GUERBY
skip
432 28 Laurent GUERBY
!!! NOTE: You have selected skip option. POAP will be aborted and password configuration will be skipped !!!
433 28 Laurent GUERBY
Disabling POAP.......2012 Jul 17 16:11:05 switch %$ VDC-1 %$ %POAP-2-POAP_INFO:   - Abort Power On Auto Provisioning [yes - continue with normal setup, skip - bypass password and basic configuration, no - continue with Power On Auto Provisioning] (yes/skip/no)[no]: 
434 28 Laurent GUERBY
Disabling POAP
435 28 Laurent GUERBY
2012 Jul 17 16:11:08 switch %$ VDC-1 %$ %POAP-2-POAP_INFO: [FOC1636R174-6C:20:56:E6:D4:01] - USB Initializing Success
436 28 Laurent GUERBY
2012 Jul 17 16:11:09 switch %$ VDC-1 %$ %POAP-2-POAP_INFO: [FOC1636R174-6C:20:56:E6:D4:01] - USB disk not detected
437 28 Laurent GUERBY
2012 Jul 17 16:11:09 switch %$ VDC-1 %$ last message repeated 1 time
438 28 Laurent GUERBY
2012 Jul 17 16:11:09 switch %$ VDC-1 %$ %POAP-2-POAP_DHCP_DISCOVER_START: [FOC1636R174-6C:20:56:E6:D4:01] - POAP DHCP Discover phase started
439 28 Laurent GUERBY
2012 Jul 17 16:11:09 switch %$ VDC-1 %$ %POAP-2-POAP_INFO:   - Abort Power On Auto Provisioning [yes - continue with normal setup, skip - bypass password and basic configuration, no - continue with Power On Auto Provisioning] (yes/skip/no)[no]: 
440 28 Laurent GUERBY
skip
441 28 Laurent GUERBY
Enabling feature lldp by default
442 28 Laurent GUERBY
Basic configuration has been skipped!
443 28 Laurent GUERBY
Applying default configuration
444 28 Laurent GUERBY
N3K:Applying Default CoPP configuration
445 28 Laurent GUERBY
446 28 Laurent GUERBY
447 28 Laurent GUERBY
448 28 Laurent GUERBY
User Access Verification
449 28 Laurent GUERBY
 login: admin
450 28 Laurent GUERBY
Password: 
451 28 Laurent GUERBY
452 28 Laurent GUERBY
Cisco Nexus Operating System (NX-OS) Software
453 28 Laurent GUERBY
TAC support: http://www.cisco.com/tac
454 28 Laurent GUERBY
Copyright (C) 2002-2017, Cisco and/or its affiliates.
455 28 Laurent GUERBY
All rights reserved.
456 28 Laurent GUERBY
The copyrights to certain works contained in this software are
457 28 Laurent GUERBY
owned by other third parties and used and distributed under their own
458 28 Laurent GUERBY
licenses, such as open source.  This software is provided "as is," and unless
459 28 Laurent GUERBY
otherwise stated, there is no warranty, express or implied, including but not
460 28 Laurent GUERBY
limited to warranties of merchantability and fitness for a particular purpose.
461 28 Laurent GUERBY
Certain components of this software are licensed under
462 28 Laurent GUERBY
the GNU General Public License (GPL) version 2.0 or 
463 28 Laurent GUERBY
GNU General Public License (GPL) version 3.0  or the GNU
464 28 Laurent GUERBY
Lesser General Public License (LGPL) Version 2.1 or 
465 28 Laurent GUERBY
Lesser General Public License (LGPL) Version 2.0. 
466 28 Laurent GUERBY
A copy of each such license is available at
467 28 Laurent GUERBY
http://www.opensource.org/licenses/gpl-2.0.php and
468 28 Laurent GUERBY
http://opensource.org/licenses/gpl-3.0.html and
469 28 Laurent GUERBY
http://www.opensource.org/licenses/lgpl-2.1.php and
470 28 Laurent GUERBY
http://www.gnu.org/licenses/old-licenses/library.txt.
471 28 Laurent GUERBY
switch# 
472 28 Laurent GUERBY
</pre>
473 23 Laurent GUERBY
474 29 Laurent GUERBY
<pre>
475 29 Laurent GUERBY
switch# show version
476 29 Laurent GUERBY
Cisco Nexus Operating System (NX-OS) Software
477 29 Laurent GUERBY
TAC support: http://www.cisco.com/tac
478 29 Laurent GUERBY
Copyright (C) 2002-2017, Cisco and/or its affiliates.
479 29 Laurent GUERBY
All rights reserved.
480 29 Laurent GUERBY
The copyrights to certain works contained in this software are
481 29 Laurent GUERBY
owned by other third parties and used and distributed under their own
482 29 Laurent GUERBY
licenses, such as open source.  This software is provided "as is," and unless
483 29 Laurent GUERBY
otherwise stated, there is no warranty, express or implied, including but not
484 29 Laurent GUERBY
limited to warranties of merchantability and fitness for a particular purpose.
485 29 Laurent GUERBY
Certain components of this software are licensed under
486 29 Laurent GUERBY
the GNU General Public License (GPL) version 2.0 or 
487 29 Laurent GUERBY
GNU General Public License (GPL) version 3.0  or the GNU
488 29 Laurent GUERBY
Lesser General Public License (LGPL) Version 2.1 or 
489 29 Laurent GUERBY
Lesser General Public License (LGPL) Version 2.0. 
490 29 Laurent GUERBY
A copy of each such license is available at
491 29 Laurent GUERBY
http://www.opensource.org/licenses/gpl-2.0.php and
492 29 Laurent GUERBY
http://opensource.org/licenses/gpl-3.0.html and
493 29 Laurent GUERBY
http://www.opensource.org/licenses/lgpl-2.1.php and
494 29 Laurent GUERBY
http://www.gnu.org/licenses/old-licenses/library.txt.
495 29 Laurent GUERBY
496 29 Laurent GUERBY
Software
497 29 Laurent GUERBY
  BIOS: version 4.5.0
498 29 Laurent GUERBY
  NXOS: version 7.0(3)I7(2)
499 29 Laurent GUERBY
  BIOS compile time:  11/09/2017
500 29 Laurent GUERBY
  NXOS image file is: bootflash:///nxos.7.0.3.I7.2.bin
501 29 Laurent GUERBY
  NXOS compile time:  11/22/2017 13:00:00 [11/22/2017 21:55:29]
502 29 Laurent GUERBY
503 29 Laurent GUERBY
504 29 Laurent GUERBY
Hardware
505 29 Laurent GUERBY
  cisco Nexus3000 C3064PQ Chassis 
506 29 Laurent GUERBY
  Intel(R) Celeron(R) CPU        P4505  @ 1.87GHz with 3902872 kB of memory.
507 29 Laurent GUERBY
  Processor Board ID FOC16382AE1
508 29 Laurent GUERBY
509 29 Laurent GUERBY
  Device name: switch
510 29 Laurent GUERBY
  bootflash:    1635720 kB
511 29 Laurent GUERBY
  usb1:               0 kB (expansion flash)
512 29 Laurent GUERBY
513 29 Laurent GUERBY
Kernel uptime is 0 day(s), 0 hour(s), 7 minute(s), 5 second(s)
514 29 Laurent GUERBY
515 29 Laurent GUERBY
Last reset 
516 29 Laurent GUERBY
  Reason: Unknown
517 29 Laurent GUERBY
  System version: 7.0(3)I7(2)
518 29 Laurent GUERBY
  Service: 
519 29 Laurent GUERBY
520 29 Laurent GUERBY
plugin
521 29 Laurent GUERBY
  Core Plugin, Ethernet Plugin
522 29 Laurent GUERBY
523 29 Laurent GUERBY
Active Package(s):
524 29 Laurent GUERBY
525 29 Laurent GUERBY
switch# 
526 29 Laurent GUERBY
527 29 Laurent GUERBY
</pre>
528 29 Laurent GUERBY
529 7 Laurent GUERBY
h2. Consommation
530 6 Laurent GUERBY
531 6 Laurent GUERBY
77 Watt, cos phi 0.92, pas de pic pendant le boot